Abstract:<p>Amorphous silica-aluminas with enhanced Brønsted acidity have been successfully synthesized via a novel acetic acid based sol-gel process. The resulting amorphous silica-aluminas possess an irregular spherical morphology, homogeneously element dispersion, and a high external surface area in the range of 374–594 m<sup>2</sup>/g with little contribution from micropores. By simply adjusting the molar Si/Al ratio in the synthesis precursor solution from 0.5 to 2.0, the total Brønsted acid site density firstly increases and then slightly decreases, consistent with the trend of summarized molar content of four and five-coordinated aluminum species. Among them, the amorphous silica-alumina with initial Si/Al ratio of 1.5 exhibits the highest Brønsted acid site density, and its supported Pt catalyst performs the highest activity resembling that of HBeta-based catalyst in the hydroisomerization of n-hexadecane. Meanwhile, a superior catalytic selectivity to multibranched isomers was received over the amorphous silica-alumina without strong Brønsted acid sites. Moreover, a remarkable stability (>2000 h) was also achieved in the hydrocracking of Fischer-Tropsch wax under industrially relevant reaction conditions. This sol-gel synthesis process provides a facile method to prepare amorphous silica-aluminas with outstanding texture and acid properties for catalytic refining in petrochemical fields.</p>

Trialkoxysilane‐capped Acrylic Resin/alumina Hybrid Materials Prepared by in Situ Sol–gel Process

Preparation and Characterization of Trialkoxysilane‐Containing Acrylic Resin/Alumina Hybrid Materials

Study on Acrylic Resin/Alumina Hybrid Materials Prepared by the Sol‐Gel Process

Robust Mg(Ca)Zr-Doped Acid-Base Bifunctional Mesoporous Silica and Their Applications in the Deacetalization-Knoevenagel Reaction.

Sol–gel derived organic–inorganic hybrid from trialkoxysilane-capped acrylic resin and titania: effects of preparation conditions on the structure and properties

Synthesis and properties of alkoxysilane-modified acrylic latex via miniemulsion polymerization

Trialkoxysilane‐capped Acrylic Resin/titania Organic–inorganic Hybrid Optical Films Prepared by the Sol–gel Process

PREPARATION OF ACRYLIC RESIN/TiO2 ORGANIC-INORGANIC HYBRID BY SOL-GEL PROCESS AND CHARACTERIZATION OF ITS STRUCTURE

Study on acrylic resin/titania organic–inorganic hybrid materials prepared by the sol–gel process

Study on Mechanical, Thermal and Optical Properties of Acrylic Resin/TiO2 Organic-inorganic Hybrid Materials

Poly(Methyl Methacrylate)-Titania Hybrid Materials by Sol-Gel Processing

Preparation of acrylate polymer/silica nanocomposite particles with high silica encapsulation efficiency via miniemulsion polymerization

Acrylic‐Based Polyurethane/Silica Hybrids Prepared by Acid‐Catalyzed Sol–Gel Process: Structure and Mechanical Properties

Effect of Preparation of Titania Sol on the Structure and Properties of Acrylic Resin/Titania Hybrid Materials

Study on Poly(butyl Methacrylate)/silica-Titania Hybrid Materials

Synthesis and Characterization of PMMA/Al 2 O 3 Composite Particles by in Situ Emulsion Polymerization

Synthesis and characterization of PMMA/Al2O3 composite particles by in situ emulsion polymerization

Synthesis and Characterization of PMMA-ZrO2 (SiO2, TiO2, Al2O3) Organic-Inorganic Hybrid Materials

Synthesis, structural and morphological characteristics of (P(MA-MPTMS)/SiO2 hybrid nanocomposites

Synthesis and characterization of amorphous silica-alumina with enhanced acidity and its application in hydro-isomerization/cracking

Preparation And Properties Of Polystyrene-Gamma-Methacryloxypropyl Trimethoxy Silane Copolymer/Zirconia Nanohybrid Materials