Abstract:The ultimate objective of hybrid miniemulsion polymerization is to produce a water-based crosslinkable coating through in situ grafting of a free radical growing acrylic polymer with an unsaturated resin. Certain authors have reported low grafting while others have reported higher. This article explores the factors that influence the grafting tendencies of these systems. Methacrylates such as methyl methacrylate (MMA) have a sterically hindered radical center that lowers its reactivity toward unsaturated resin. This steric hindrance from the methyl group forces grafting of this type of monomer to occur by abstraction of a hydrogen allylic to a resinous double bond. This chain transfer produces a relatively inactive radical on the resin that reduces the grafting efficiency. The transfer process also inherently produces some degree of terminated PMMA polymer within the particle. Grafting occurs in this type of system through termination of living PMMA chains with that radical produced on the resin. For relatively water-soluble monomers such as MMA, grafting efficiency is further lessened by homogeneous nucleation resulting from the monomer hydrophilicity. These newly created particles cannot contain alkyd due to its hydrophobicity and thus inability to transport across the aqueous phase, and hence cannot produce grafted polymer. Nonetheless, degree of grafting of nearly 50% was observed in these systems. For hybrid systems involving an acrylate monomer such as butyl acrylate (BA), virtually complete grafting with alkyd was observed. This is due to the uninhibited BA radical center allowing the molecule to add directly through a resin double bond. This process offers the possibility for complete grafting. Homogeneous nucleation is not involved in this system due to the insolubility of BA in the aqueous phase. Resin double bond content and degree of conjugation also play an integral role in the grafting process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1825–1836, 2003

Study on Acrylic Resin/Alumina Hybrid Materials Prepared by the Sol‐Gel Process

Preparation and Characterization of Trialkoxysilane‐Containing Acrylic Resin/Alumina Hybrid Materials

Trialkoxysilane‐capped Acrylic Resin/alumina Hybrid Materials Prepared by in Situ Sol–gel Process

Synthesis and properties of alkoxysilane-modified acrylic latex via miniemulsion polymerization

Sol–gel derived organic–inorganic hybrid from trialkoxysilane-capped acrylic resin and titania: effects of preparation conditions on the structure and properties

Study on Mechanical, Thermal and Optical Properties of Acrylic Resin/TiO2 Organic-inorganic Hybrid Materials

Grafting Mechanisms in Hybrid Miniemulsion Polymerization

Study on acrylic resin/titania organic–inorganic hybrid materials prepared by the sol–gel process

Trialkoxysilane‐capped Acrylic Resin/titania Organic–inorganic Hybrid Optical Films Prepared by the Sol–gel Process

Effect of Preparation of Titania Sol on the Structure and Properties of Acrylic Resin/Titania Hybrid Materials

Mechanical Properties of Interface‐free Polyacrylate‐silica Hybrid Sol–gel Materials for Potential Dental Applications

Acrylic‐Based Polyurethane/Silica Hybrids Prepared by Acid‐Catalyzed Sol–Gel Process: Structure and Mechanical Properties

Poly(Methyl Methacrylate)-Titania Hybrid Materials by Sol-Gel Processing

Synthesis and Characterization of PMMA-ZrO2 (SiO2, TiO2, Al2O3) Organic-Inorganic Hybrid Materials

Development of silane/acrylate-based hybrid polymer coating through sol–gel technique for anti-corrosive application

Fiber Reinforced Epoxy Resin Composite Materials Using Carboxylate-Alumoxanes as Cross-Linking Agents

Investigation of mechanical properties of alumina nanoparticle-loaded hybrid glass/carbon-fiber-reinforced epoxy composites

Gelcasting of alumina ceramics in the mixed acrylamide and polyacrylamide systems

Effect of surface functional modification of nano-alumina particles on thermal and mechanical properties of epoxy nanocomposites

Strengthening Network of Polyacrylic Acid/Silica Nanocomposite Hydrogels

Dispersion and Gelation Properties of Alumina Systems with Isobam Assisted by Dicarboxylic Acids