Abstract:This study describes preparation and characterization of fluorine-containing organic-inorganic hybrid coatings. The organic part consists of bisphenol-A glycerolate (1 glycerol/phenol) diacrylate resin and 1,6-hexanediol diacrylate reactive diluent. The inorganically rich part comprises trimethoxysilane-terminated urethane, 1H,1H,2H,2H-perfluorooctyltriethoxysilane, 3-(trimethoxysilyl) propyl methacrylate and sol–gel precursors that are products of hydrolysis and condensation reactions. Bisphenol-A glycerolate (1 glycerol/phenol) diacrylate resin was added to the inorganic part in predetermined amounts. The resultant mixture was utilized in the preparation of free films as well as coatings on aluminum substrates. Thermal and mechanical tests such as DSC, thermo-gravimetric analysis (TGA), and tensile and shore D hardness tests were performed on free films. Water contact angle, gloss, Taber abrasion test, cross-cut and tubular impact tests were conducted on the coated samples. SEM examination and EDS analysis was performed on the fractured surfaces of free films. The hybrid coatings on the aluminum sheets gave rise to properties such as moderately glossed surface; low wear rate and hydrophobicity. Tensile strength of free films increased with up to 10% inorganic content in the hybrid structure and this increase was approximately three times that of the control sample. As expected; the % strain value decreased by 17.3 with the increase in inorganic content and elastic modulus values increased by a factor of approximately 6. Resistance to ketone-based solvents was proven and an increase in hardness was observed as the ratio of the inorganic part increased. Samples which contain 10% sol–gel content were observed to provide optimal properties.

Moisture-cured elastomeric transparent UV and X-ray shielding organic–inorganic hybrids

The Effect of Silane Coupling Agent Containing Methacryloxy Group on UV-Curable Acrylate-Modified Polyurethane/SiO2 Hybrid Coatings

Hydrophilic Organosilicone Rubber: The New Organic-Inorganic Hybrid Consolidant For Ancient Earthen Architectures

Synthesis and Characterization of Eugenol‐based Silicone Modified Waterborne Polyurethane with Excellent Properties

Synthesis and Properties of Nanosilica‐reinforced Polyurethane for Grouting

Self-healing, thermally managed, wearable gamma-ray shielding artifacts based on a tantalum( V ) oxide filled self-made polyborosiloxane - hydrogen-terminated phenyl polysiloxane double network elastomer

Polyimide/silica/titania Nanohybrids Via a Novel Non-Hydrolytic Sol–gel Route

Mechanical Reinforcement and UV Ageing Resistance of SiO2/C Hybrid on Poly(butylene Adipate‑co‑terephthalate) Film

Trialkoxysilane‐capped Acrylic Resin/titania Organic–inorganic Hybrid Optical Films Prepared by the Sol–gel Process

Investigation of Coating Performance of UV-Curable Hybrid Polymers Containing 1H,1H,2H,2H-Perfluorooctyltriethoxysilane Coated on Aluminum Substrates

Preparation of high-performance polyurethane-polyacrylate coatings based on hyperbranched structure and application in anti-ultraviolet film

Synthesis and Characterization of Epoxy/polysiloxane Hybrid Materials

Poly(methyl Methacrylate)/silica/titania Ternary Nanocomposites with Greatly Improved Thermal and Ultraviolet-Shielding Properties

Transparent and Hard Siloxane Based Hybrid UV-Curable Coating Materials with Amphiphobic Properties.

A facile route to prepare homogeneous silicone resin doped with titanium

UV-Cured Transparent Silicone Materials with High Tensile Strength Prepared from Hyperbranched Silicon-Containing Polymers and Polyurethane-Acrylates

Synthesis of TiO2–SiO2/waterborne Polyurethane Hybrid with Amino-Siloxane Terminated Via a Sol–gel Process

Acrylic‐Based Polyurethane/Silica Hybrids Prepared by Acid‐Catalyzed Sol–Gel Process: Structure and Mechanical Properties

UV-cured Hybrid Inorganic-Organic Polymer Electrolyte Based on Organically Modified Polysiloxane

Fabrication of UV/moisture dual curing coatings based on fluorinated polyoxetanes for anti-fouling applications

Mn Doping and Core-Shell Engineering of Silane-Modified Mn-TiO2@SiO2 Nanoparticles with Drastically Reduced Photocatalytic Activity for Transparent UV-shielding Hybrid Materials