Abstract:The relationship between von Mises equivalent stress <math>σ¯</math> and equivalent plastic strain <math>ε¯</math> (PEEQ), termed as von Mises stress-strain, plays an important role in numerical simulations for ductile fracture of structural metallic materials with large plastic strain. The standard uniaxial tensile test on cylindrical specimens is the most straightforward method to derive the (<math>σ¯−ε¯</math>) data. However, the distribution of the stress and strain along the necking section of the tensile specimen is no longer uniform in the post-necking process, which induces difficulty in acquiring the (<math>σ¯−ε¯</math>) data. The existing correction methods to identify von Mises stress-strain in the post-necking regime need instantaneous geometry of the notched region and ignore influence of the initial geometry of the specimen, which induces these methods are inconvenient for application and inapplicable for circumferentially notched tensile specimens to determine (<math>σ¯−ε¯</math>) of each individual material zone in a hybrid coupon (e.g. weldment). In the present study, influences of initial geometry of the specimen and plastic hardening property of material on necking process are investigated firstly. It is found that the shrinking behavior of the minimum cross-section of the specimen is determined by the geometric parameter of specimen and plastic hardening exponent of materials. Based on an extensive parametric study a modified power law function to characterize the von Mises stress-strain curve from tensile tests on circumferentially notched specimens without measuring instantaneous geometry of cross-section is proposed.

Influence of specimen dimensions and strain measurement methods on tensile stress–strain curves

Influence of Specimen Dimensions on the Tensile Behavior of Ultrafine-Grained Cu

On the Study of Stress-Strain of Thin-Walled Cylinder Tensile Specimens at High Temperature

Experimental Methodology for Obtaining the Flow Curve of Sheet Materials in a Wide Range of Strains

Large-Scale Strain Measurement of Micro-Specimens in High-Temperature Environments Based on Efpi

Influence of Specimen Thickness with Rectangular Cross-Section on the Tensile Properties of Structural Steels

Measurement Error of Young’s Modulus Considering the Gravity and Thermal Expansion of Thin Specimens Forin Situtensile Testing

Importance of TEM sample thickness for measuring strain fields

Small specimen techniques for estimation of tensile, fatigue, fracture and crack propagation material model parameters

Simplified method to identify full von Mises stress-strain curve of structural metals

Evaluation of tensile stress-strain curve of electroplated copper film by characterizing indentation size effect with a single nanoindentation

Optimizing Parallel Section Length For Small Tensile Specimen With Fabrication Non-Uniformity In Thickness

A New Method for Strain Measurement in the Tensile Testing of Filamentous Materials

A comprehensive solution to miniaturized tensile testing: Specimen geometry optimization and extraction of constitutive behaviors using inverse FEM procedure

An experimental investigation of large-strain tensile behavior of a metal sheet

An Experimental Method for Micro-Scale Uniaxial Tension Test

A NEW PERSPECTIVE ON NANO-MECHNICS: QUANTITATIVE DEFORMATION TEST IN THE TEM

A Tensile Characterization Study of Metal Sheet in Large-Strain

Size Effect in Stainless Steel Thin Wires under Tension

Experimental Study on Specimen and Grain Size Effects in Uniaxial Tension Test of Aluminum Foil