Abstract:Torsional deformation mechanism of 3D angle‐interlock woven preforms: experiment and simulation. To clarify the torsional deformation performance of 3D angle‐interlock woven preforms, this paper aims to establish the relationship between the structural parameters and the torsional deformation performance of fabrics, examining the torsional deformation mechanism of fabrics. The torsional deformation properties of 3D angle‐interlock fabrics are first characterized by experimental methods, and the influence laws of typical structural parameters on the torsional deformation properties of fabrics are obtained. In continuing, a numerical model for 3D angle‐interlock fabric torsional deformation is established based on virtual fiber modeling technology. To demonstrate the accurateness of the newly developed model, its results are methodically compared with the macro‐ and micro‐morphology of fabric torsional deformation, and a reasonably good agreement between their results is attained. The characteristics of the "arc" and "diagonal" arrangement of yarns in the same column after torsional deformation are effectively employed to propose a quantitative analysis of the deviation degree of yarns. This analysis is essentially based on the variation coefficient index, which is commonly utilized to compare and analyze the variation laws of warp and weft cross‐sections at different torsion angles. This study holds scientific significance and engineering value for optimizing the design and enhancing the performance of composite blades. Highlights Design the torsional deformation device of the preform. The torsion Angle torque curve of the preform was tested. The numerical simulation method of torsion deformation is established. The microstructure deformation mechanism of the preform was analyzed.

THE MESH WINDING OF TEE-SHAPE TUBE

Computer Aided Fiber Path Design to Torus in Filament Winding

Design Method of Circular Steel Tube with Tapered Ends

Shape and Mechanical Behavior of Geotubes on Rigid Foundation with Symmetry Arbitrary Shape

Finite element modeling and simulation of yarn in winding process

Design and Development of Turn Insulation Automatic Wrapping System for CRAFT TF

Optimization of taper winding tension in roll-to-roll web systems

Design of the five-axis NC fiber winding machine and its tension system

3D winding path modeling of overwrapped pressure vessels with novel mesh-based directional projection and normal adaptive convex helix algorithms

Winding pattern design of composite cylinders considering the effect of fiber stacking

Theory and Design of a Novel Multi-Layer Modular Modulation Winding

Numerical simulation of 3D angle-interlock woven fabric forming and compression processes

Geometric Modeling of 3D Woven Composite Tube RVE with Cross-section Variations

Study on the forming process of thread raceway surface under the hard whirling

Study on improving the winding forming uniformity of high-speed silk reeling machine with large package

Experimental characterization and numerical analysis of 3D woven preforms torsional deformation

Forming characteristics of thin-walled tubes manufactured by free bending process-based nontangential rotation bending die

Design of continuous transition line pattern between layers of composite pressure vessel

3D Winding Path Modeling on Truncated Conical Shell with proposed Outer-contour Expanding and Convex Helix Algorithms

A Theoretical Model of the Inversion Tube over a Conical Die

A Study of 3D Finite Element Modeling Method for Stagger Spinning of Thin-Walled Tube