Abstract:Journal of Composite Materials, Ahead of Print. Advanced 3D woven composites have become an enabling technology in many industrial applications due to their proven benefits, particularly the improvement of the out-of-plane mechanical behavior with respect to other reinforcement schemes. The latter property has been shown to be strongly affected by the effects of compaction during manufacturing. The present study proposes an automated framework, based on heuristic procedures, for the generation of representative volume elements (RVEs) of 3D woven composites, allowing to include global and local geometrical features induced by transverse compaction, such as overall thickness reduction, changes in yarn cross-sections and consistent global/local fiber fractions. The methodology is illustrated for three types of reinforcement, namely a plain weave, an angular through-thickness interlock and a 3D orthogonal RVE. The resulting geometries generated by the proposed method compare favourably with typical observations from the literature in a quantitative manner. Finally, the proposed framework is integrated with a previously developed meshing strategy to allow damage studies for a selected architecture (plain weave) under torsional loading, presenting a complete computational chain by building cohesive zone finite element models from compacted RVEs. The torque-angle response curves obtained after the damage simulations show a decrease in stiffness and an increase of damage levels with compaction, which is in line with the expectations.

Geometric Modeling of 3D Woven Composite Tube RVE with Cross-section Variations

Progressive failure analysis of 2D woven composites at the meso-micro scale

Modelling of Concrete-Filled Filament-Wound FRP Confining Tubes Considering Nonlinear Biaxial Tube Behavior

An Algorithm for Automatically Establishing a Multi- Parameter RVE Model for Z-Pin Composite Laminates

High-fidelity modeling of 3D woven composites considering inhomogeneous intra-yarn fiber volume fractions

Mechanical Behavior of 3D Woven Variable Thickness Composite Plate under Tensile Loading

A parameterized and automated modelling method for 3D orthogonal woven composite RVEs considering yarn geometry variations

A novel modeling method for the mechanical behavior of 3D woven fabrics considering yarn distortion

Finite element analysis of 2-D tubular braided composite based on geometrical models to study mechanical performances

Finite Element Modeling of 3D Orthogonal Woven C/C Composite Based on Micro-Computed Tomography Experiment

A new progressive damage model for predicting the tensile behavior of the three-dimensional woven carbon/carbon composites using micromechanics method

Meso-scale modeling and damage analysis of carbon/epoxy woven fabric composite under in-plane tension and compression loadings

Multi-scale modeling and elastic properties prediction of 3D four-directional tubular braided composites

Automated reconstruction and conformal discretization of 3D woven composite CT scans with local fiber volume fraction control

A Methodology to Obtain the Accurate RVEs by a Multiscale Numerical Simulation of the 3D Braiding Process

Axial Compression Experiments and Finite Element Analysis of Basalt Fiber/Epoxy Resin Three-Dimensional Tubular Woven Composites

Finite Element Modeling of Mechanical Properties of 3D Five-Directional Rectangular Braided Composites

Improved Modeling Method for 3-Dimensional Woven Composites Using Weaving Parameters

Progressive failure prediction of three-dimensional woven composites using a generic multi-scale analytical model

Micromechanical modeling for longitudinal tensile property of unidirectional CFRP considering dispersion of fiber properties

Incorporation of compaction effects in the automated generation of 3D woven composites representative volume elements by geometrical modelling