Abstract:Journal of Composite Materials, Ahead of Print. Composite overwrapped pressure vessels (COPVs) offer significant weight advantages over traditional all-metal vessels particularly in industries like aerospace, automotive and pharmaceutical, but pose unique challenges in mechanical design, fabrication, and testing. Despite their benefits, COPVs are susceptible to stress rupture failure, which can lead to catastrophic consequences during operation. This failure mode is not fully understood, with burst pressure-induced extreme stress concentrations and dynamic loading primarily contributing to rapid deformation and strain. To address these concerns, a comprehensive investigation was conducted, focusing on optimizing and examining the effects of optimum winding angle and lay-up pattern configuration on burst pressure in vessels under internal pressure. Finite element modeling analyzed the burst pressure behavior of COPVs with a 4 mm thick aluminum core cylinder and varying layers of carbon/fiber epoxy, each with a constant thickness. ABAQUS composite modeler generated 18 COPV models with carbon fiber/epoxy plies, ensuring uniform thicknesses while exploring different fiber orientations. The effects of ply stacking sequence were analyzed through finite element analysis for all models, comprising varying layers with uniform thicknesses. Attention was paid to failure criteria, methodically evaluating the burst strength of the Al/CFRPC COPVs This exhaustive analysis yielded an optimal COPV design profile characterized by a precisely calibrated ply stacking sequence of [24.50, −24.50] PP winding pattern and six (6) arranged layers. The stress-strain distribution analysis of the Composite Overwrapped Pressure Vessel (COPV) revealed both a uniform distribution of stress across its surface and extreme stress concentration, particularly peaking towards the polar boss region. This concentration is discernible due to variations in ply thickness induced by the overwrapped fiber orientation. This investigation provides valuable insights for optimizing COPV design and enhancing its performance and reliability in various applications.

Design of continuous transition line pattern between layers of composite pressure vessel

Mechanical Analysis and Optimal Design for Carbon Fiber Resin Composite Wound Hydrogen Storage Vessel With Aluminum Alloy Liner

Prediction of composite pressure vessel dome contour and strength analysis based on a new fiber thickness calculation method

Optimal Winding Conditions of Flat Steel Ribbon Wound Pressure Vessels with Controllable Stresses

Application of Variable Slippage Coefficients to the Design of Filament Wound Toroidal Pressure Vessels

Mechanical Analysis and Reasonable Design for Ti-Al Alloy Liner Wound with Carbon Fiber Resin Composite High Pressure Vessel

Design method of variable slippage coefficient non‐geodesic filament‐wound composite pressure vessels

Modeling and experimental validation of compaction pressure distribution for automated fiber placement

Design and Fabrication of Carbon-Fiber-wound Composite Pressure Vessel with HDPE Liner

Optimization and experimental validation of reinforcing fibers winding pattern for carbon/carbon composite crucible preform

Optimizing performance of hybrid fiber reinforced overwrapped pressure vessel

Effect of layup sequence on cure deformation and accurate prediction of composite pressure vessels

Manufacturing and axial compression performance of a novel composite cylindrical shell

Combined Composites Layup Architecture and Mechanical Evaluation of Type IV Pressure Vessels: A Novel Analytical Approach

3D winding path modeling of overwrapped pressure vessels with novel mesh-based directional projection and normal adaptive convex helix algorithms

Non-geodesic winding design method for the composite shell of unequal-pole-hole solid rocket motor

Structure Analysis of Composite Pressure Vessel with Ultra-Thin Metallic Liner

Integrated design for the forming process and structural performance of variable-thickness laminates

Composite Overwrapped Pressure Vessel Design Optimization Using Numerical Method

Winding pattern design of composite cylinders considering the effect of fiber stacking

Abnormal Shape Mould Winding