Abstract:A comprehensive modeling framework for the thermoforming of polymer matrix woven laminate composite was developed. Two numerical indicators, the slip path length and traction magnitude, have been identified to be positively correlated to matrix smearing and wrinkling defects. The material model has been calibrated with picture-frame experimental results, and the prediction accuracy for intra-ply shear and thickness distribution was examined with measurements of the physically formed parts. Specifically, thickness prediction for most locations on the formed parts was accurate within an 11.6% error margin. However, at two points with significant intra-ply shear, the prediction errors increased to around 20%. Finally, a parametric study was conducted to determine the relationship between various process parameters and the quality of the formed part. For the trapezoidal part, orienting the laminate at 45 degrees to the mold axis reduces the likelihood of matrix smear and wrinkling defects. Although this laminate orientation yielded a greater spatial variation in part thickness, the thickness deviation is lower than that for the 0-degree orientation case. Two forming analyses were conducted with ramp rates of 25 mm/s and 80 mm/s to match the equipment's operational limits. It was observed that higher forming rates led to a greater likelihood of defects, as evidenced by a 15% and 10% increase in the formed part areas with longer slip paths and higher traction magnitudes, respectively. It was discovered that shallower molds benefit from faster ramp rates, while deeper molds require slower rates to manage extensive shearing, stretching and bending. Faster forming rates lead to smaller thickness increases at high intra-ply shear regions, indicating a shift from intra-ply shear to out-of-plane bending due to the visco-plastic effect of the molten laminate and can negatively impact part quality. Lastly, it was shown that a well-conceived strategy using darts could improve the part quality by reducing the magnitude of the defect indicators.

Integrated design for the forming process and structural performance of variable-thickness laminates

Understanding the Impact of Fibre Wrinkle Architectures on Composite Laminates Through Tailored Gaps and Overlaps

Design and analysis of the mandrel structure for a composite S-shaped inlet

Structure Design on Thermoplastic Composites Considering Forming Effects

Simultaneous Discrete Topology Optimization Of Ply Orientation And Thickness For Carbon Fiber Reinforced Plastic-Laminated Structures

Translaminar enveloping ply for CFRP interlaminar toughening

Study on Optimization of Drilling Parameters for Laminated Composite Materials

Lamination Design Optimization for Continuous Fiber Reinforced Composites of Variable Thicknesses

Automatic Modeling and Optimization of Tapered Laminates with Ply Drops

Translaminar-envelope Ply for CFRP Mechanical Enhancement

Fabric draping simulation in composites manufacturing. Part I: Description and applications

A Focused Review of the Draping Process and Its Impact on the Resin Infusion in Liquid Composite Molding

A Modeling Framework for the Thermoforming of Carbon Fiber Reinforced Thermoplastic Composites

Integrated optimization of ply number, layer thickness, and fiber angle for variable-stiffness composites using dynamic multi-fidelity surrogate model

Experimental and numerical studies on two-point incremental forming of woven fabric composite sheet

Design and manufacture of mould-free fibre-reinforced laminates with compound curvature

Manufacturability-constrained optimization for enhancing quality and suitability of injection-molded short fiber-reinforced plastic/metal hybrid automotive structures

Parametric design and modeling method of CFRP laminated components applicable for multi-material vehicle body development

Draping of plain woven carbon fabrics over a double-curvature mold

A high-efficiency material deployment design method assisted with multiscale analysis

Optimization of Fiber Orientation and Topology for Curved-Folded Laminated Bamboo Veneer Shells