Abstract:Combined application of steel, aluminum and CFRP is the main direction of future lightweight body development. However, the anisotropy and additional lamination design variables of CFRP parts poses significant challenges for the development of multi-material bodies. This study establishes a parametric design method for the variable-thickness lamination scheme based on non-uniform rational B-splines (NURBS), it can be coupled with existing parametric design methods for structural shapes to formulate a complete parametric design and modelling of CFRP components. On this basis, a homogenized intermediate material property is derived from classic laminate theory by introducing lamination assumptions, it enables a stepwise multi-material body optimization method to solve the challenge that components' material design variables switching between CFRP and alloy will introduce/eliminate lamination design variables iteratively, posing a great optimization convergence difficulty. The proposed parametric modeling method for CFRP components was validated by experimental tests of a fabricated roof beam, and the proposed optimization method was applied to a vehicle body, achieving 15.9%, 23.9%, 18.6%, 12.2% increase in bending and tortional stiffness and modal frequencies; 20.2%, 9.3%, 12.7% reduction of weight and peak acceleration in frontal and side collisions. This study enables the forward design of multi-material bodies compatible with CFRP parts.

What problem does this paper attempt to address?

The problems that this paper attempts to solve mainly focus on two aspects: 1. **Parametric Design and Modeling of Composite (CFRP) Components**: - **Challenges**: The application of carbon - fiber - reinforced plastics (CFRP) in automotive body materials has brought significant design challenges, especially the complexity of its multi - scale design variables (macro and meso - scale). Existing parametric design methods are difficult to handle these multi - scale variables simultaneously, and there are problems of irregular layer shapes and small - sized reinforcing layers in actual manufacturing. - **Solutions**: The paper proposes a parametric design method based on a non - uniform rational B - spline (NURBS) variable - thickness lamination scheme, which can be combined with existing structural shape parametric design methods to achieve a complete two - scale parametric design and modeling of CFRP components. 2. **Integrated Optimization of Multi - material Vehicle Bodies**: - **Challenges**: In the optimization process of multi - material vehicle bodies, when the material design variables are switched from metal to CFRP, the dimension of the design space will change, which makes it difficult for the optimization process to converge. Existing optimization algorithms are difficult to handle this problem of dimension change. - **Solutions**: The paper proposes a step - by - step optimization strategy. By introducing homogenized intermediate material properties, it solves the convergence difficulty problem caused by the change of the design space in the optimization of multi - material vehicle bodies. The application results on vehicle bodies show significant performance improvement and lightweight effects. Specifically, the main contributions of the paper include: - **Complete Two - scale Parametric Design and Modeling**: A parametric design method for the variable - thickness lamination scheme of CFRP components is proposed, which can be combined with existing macro - parametric design methods to achieve a complete two - scale parametric modeling. - **Homogenization Method**: Based on the classical laminate theory and lamination assumptions, the homogenized intermediate material properties are derived, which solves the problem of design space change in the optimization of multi - material vehicle bodies. - **Experimental Verification**: By manufacturing and testing the prototype of the CFRP roof beam, the effectiveness of the proposed parametric modeling method is verified. - **Performance Improvement**: The application results on vehicle bodies show that this method can significantly improve the bending stiffness, torsional stiffness and modal frequency, while reducing the weight and the peak acceleration during collision. These contributions provide new methods and technical support for the design and optimization of multi - material vehicle bodies, especially in the application of CFRP components.

Parametric design and modeling method of CFRP laminated components applicable for multi-material vehicle body development

Experimental and numerical studies on bending characteristics of woven CFRP reinforced aluminum thin-walled automotive structures

Reliability-based multilevel optimization of carbon fiber-reinforced plastic control arm

Lightweight design of multi-material body structure based on material selection method and implicit parametric modeling

Application Research on the Lightweight Design and Optimization of Carbon Fiber Reinforced Polymers (CFRP) Floor for Automobile

Carbody structural lightweighting based on implicit parameterized model

Discrete Topology Optimization of Ply Orientation for a Carbon Fiber Reinforced Plastic (CFRP) Laminate Vehicle Door

Topology optimization for additive manufacturing of CFRP structures

Crashworthiness optimization of a sandwich tube filled with CFRP sinusoidal corrugated board

Design and optimisation of vehicle frontal bumper beam with alternative carbon fibre-reinforced plastics in corrugated sandwich structure

An integrated computational materials engineering framework to analyze the failure behaviors of carbon fiber reinforced polymer composites for lightweight vehicle applications

Structure Design on Thermoplastic Composites Considering Forming Effects

Failure analysis and optimization design of CFRP automotive seat back under multiple conditions

Crashworthiness design of novel CFRP functionally-graded conical square structures with variable circumscribed diameters

Optimisation design of CFRP passenger car seat backplane based on impact characteristics

Simultaneous Discrete Topology Optimization Of Ply Orientation And Thickness For Carbon Fiber Reinforced Plastic-Laminated Structures

Simultaneous optimization of fiber paths and geometric dimensions for fiber composite laminates using double neural network-surrogate model and genetic algorithm

Research on NCF fabric CFRP pultrusion beam mechanical performance and laminate design for railway vehicle application

Multi‐Disciplinary Design Optimization of a Composite Car Door for Structural Performance, NVH, Crashworthiness, Durability and Manufacturability

Crashworthiness analysis of variable thickness CFRP/Al hybrid multi-cell tube

Optimization of Friction Lap Joining Parameters and Exploration Connection Mechanism of CFRPA6/6061-T6 Aluminum Alloy Hybrid Structures