Abstract:Facing the apparent enhancement of rated power of offshore wind turbines, the increasing rotor diameter and blade length gradually pose severe challenges to its support structure for resisting extreme loads. Due to the remarkable composite effect, the recently developed tapered concrete-filled double skin steel tubular (CFDST) members can provide a high-performance structural type and competitive application prospect compared to traditional steel tower barrels. Therefore, this paper conducted the numerical and theoretical research on out-of-code tapered CFDST members under pure torsion and compression-torsion combination. The finite element (FE) model was established to examine the full-range mechanism including torque versus deformation response ( T - θ curve), interaction behavior and component contribution, indicating that four characteristic points can distinguish the T - θ curve under pure torsion, and slight contact pressure between the inner tube and sandwich concrete exists along the height direction. The parametric study was performed to investigate the influences of geometric-physical parameters, e.g., by increasing tapered angle ( ψ ) 0.2°, the torsional capacity obtains a reduction of 5%; hollow ratios ( χ ), axial compression ratios, and diameter-to-thickness ( D / t ) ratios of double-skin tubes obviously affect the torsion resistance; altering steel yield grade influences torsional capacity than concrete grade. Subsequently, a theoretical multilayered cylinder model as the simplified design tool was proposed to simulate full-range T - θ curves of tapered CFDST members. Moreover, a modified design method for calculating N - T correlation curve was developed and validated by introducing the refined equations of pure torsion resistance ( T u ), where the design methods in current codes displayed a quite conservative prediction for tapered CFDST members with out-of-code parameters (e.g., hollow ratios or D / t ratios). The above research on out-of-code tapered CFDST members can offer valuable design guidelines for its engineering applications.

Design Method of Circular Steel Tube with Tapered Ends

Experimental Investigation of Circular Steel Tubes with Tapered Ends Subjected to Bending,compression and Torsion

Experimental study and capacity analysis of double-tapered rectangular steel tubes

Element Stiffness Matrix and Modified Coefficients for Circular Tube with Tapered Ends

Analytical Study of Circular Concrete-Filled Steel Tube Stub Columns under Axial Compression

Arranging the Plastic Hinges and Improving the Strength of Steel Tubes with Tapered Ends: Analysis and Tests

Design of Thin-Walled Centrifugal Concrete-Filled Steel Tubes under Torsion

Investigation on bearing resistance of thin-walled circular steel tube subjected to eccentric loading

Experimental Investigation And Design Of Concrete-Filled Cold-Formed Thin-Walled Steel Tubes Subject To Bending

RESEARCH ON LOCAL BUCKLING OF DODECAGONAL SECTION DOUBLE SKINNED CONCRETE-FILLED STEEL TUBE SHORT COLUMN

Torsional Ultimate Bearing Capacity of Centrifugal Concrete Filled Steel Tube Based on Model of Failure Line

Design Of Concrete-Filled Steel Tubular Chs Connections In Tension

FLEXURAL BEHAVIOUR OF THIN-WALLED DODECAGONAL SECTION DOUBLE SKIN CONCRETE-FILLED STEEL TUBES

Research on mechanical behaviour of tapered concrete-filled double skin steel tubular members with large hollow ratio subjected to bending

Bending Strength of Thin-Walled Centrifugal Concrete-Filled Steel Tubes

Bending behavior and design of tapered lightweight CFDSST with large hollow ratio

Analytical behavior and bearing capacity research on out-of-code tapered CFDST members under pure torsion and compression-torsion combination

Ultimate Compressive Capacity of Tapered Concrete-Filled Double Skin Steel Tubular Stub Columns with Large Hollow Ratio

Torsional Behaviour of Tapered CFDST Members with Large Void Ratio

Behaviour of tapered CFDST columns with large hollow ratio under combined loads

Analytical Model and Design Formulae of Circular CFSTs under Axial Tension