Abstract:This paper presents numerical investigation of stress distribution within fiber optic taper during its drawing process. A thermoviscoelastic model is proposed to describe the glass mechanical behavior from solid to liquid in a broad temperature range where the fiber optic taper drawing undergoes. The model is validated by experiments and used to study stress distribution in the fiber optic taper during fabrication. Roles of key parameters are discussed including geometrical configuration of the furnace, temperature difference between heating and cooling regions and drawing speed. Results show that the stress distribution is mainly influenced by thermal environment surrounding the taper. While the afore-mentioned key parameters all affect the thermal environ-ment, they thus also change the stress distribution in the fiber optic taper. A shorter length of adiabatic region and smaller temperature difference between the heating region and cooling region make the impact of cooling region on thermal environment to fiber drawing more significantly. Conversely, a longer adiabatic region and a larger temperature difference will enhance the impact of heating region. Proper increase in drawing speed can promote heat transfer arising from rheologic motion, thus improving the homogeneity of stress distribution in the fiber taper. Based on the understanding derived from this study, an improved heating and drawing design is proposed to achieve more homogeneity of stress in fiber optic taper during the drawing process.

Computer Aided Fiber Path Design to Torus in Filament Winding

Algorithms for Constructing Initial and Offset Path of Automated Fiber Placement for Complex Double-Curved Surfaces

Application of Variable Slippage Coefficients to the Design of Filament Wound Toroidal Pressure Vessels

Mechanism for Wrapping Fiber Around the Y Fork

CAD for the Fiber Path and Machine Path of Composite Elbows

A Practical Grid Generation Procedure for the Design of Free-Form Structures

3D Winding Path Modeling on Truncated Conical Shell with proposed Outer-contour Expanding and Convex Helix Algorithms

3D winding path modeling of overwrapped pressure vessels with novel mesh-based directional projection and normal adaptive convex helix algorithms

A fast and precise filament winding path planning method based on discrete non-iterative semi-geodesic algorithm for all applicable mandrel

Spherically curved woven fabrics: geometrical calculation methods and weave pattern development

CAM System for Filament Winding on Elbows

4Dcurve: A Shape-Changing Fabrication Method Based on Curved Paths with a 3D Printing Pen.

Theoretical and Numerical Analysis for Design of High Ratio Fiber Optic Taper Drawing Process

Connected Fermat Spirals for Layered Fabrication

Rheological Properties of Fiber Suspensions Flowing Through a Curved Expansion Duct

Filament winding pattern generation for non-axisymmetric mandrels based on path adaptive adjustment

Design and optimize of 3-axis filament winding machine

Generation of Tow Paths on a Curved Shell in Three-Dimensional Space for Fiber Steering

Numerical Study and Scale Analysis of Inner and Outer Diameters Prediction in Fabrication of Hollow Fiber Membranes for Nerve Regeneration

Control of Stress Distribution During Large Radius Fiber Optic Taper Drawing Process Based on 2D Simulation

Toolpath Generation for High Density Spatial Fiber Printing Guided by Principal Stresses