Abstract:A 1200V 4H-SiC lateral double-diffused MOSFET (LDMOS) featuring a lightly doped P-top layer at the source side, and a high-doped N-well layer arranged between the channel and P-top layer is proposed. In order to promote the simulation accuracy, Sentaurus Process Tool that can simulate the oxidation, ion implantation, annealing, diffusion, etc. is used for structure establishment in this letter. In the ON-state, the electric potential at the end of the channel can be modulated and lowered due to the existence of P-top layer. The P-top layer can shield the voltage from the drain side, which results in the reduced saturation current ( $text{I}_{text {dsat}}$ ), especially at high drain-source voltage ( $text{V}_{text {DS}}$ ). The introduction of the N-well layer ensures that the P-top layer has almost no impact on the linear current ( $text{I}_{text {dlin}}$ ). Compared with the conventional SiC LDMOS, the $text{I}_{text {dsat}}$ at $text{V}_{text {DS}},,=400text{V}$ of the proposed LDMOS decreases by 24.2% with no degradation in the $text{I}_{text {dlin}}$ and the OFF-state breakdown voltage (BV). Benefiting from the suppressed $text{I}_{text {dsat}}$ , the proposed SiC LDMOS achieves a ON-state BV 366V higher than that of the conventional SiC LDMOS at the gate-source voltage of 20V. Since the short-circuit capability of the SiC power devices is much sensitive to the $text{I}_{text {dsat}}$ -/tex-math>, the 24.2% reduction in $text{I}_{text {dsat}}$ can predict a considerable enhanced short-circuit capability. Simulation results show that the short-circuit withstand time can be improved by 105%.

Study of Extended Drain NMOS Fabricated with Conventional CMOS Technology

Study of Drain-Extended Nmos under Electrostatic Discharge Stress in 28 Nm and 40 Nm Cmos Process

Design Analysis of Novel Substrate-Triggered GGNMOS in 65nm CMOS Process

Investigation of Esd Protection Strategy in High Voltage Bipolar-Cmos-Dmos Process

ESD-capability Study of High-voltage nLDMOSs with out the Drift Region DPW Effect

A Novel Substrate-Optimized GGNMOS for Low-Voltage ESD Protection in 65 nm CMOS Process

A comprehensive analysis of breakdown mechanisms in 4H-SiC MOSFET and JFET

Substrate-engineered GGNMOS for low trigger voltage ESD in 65 nm CMOS process.

Extended-p+ Stepped Gate (ESG) LDMOS for Improved Performance

Performance of Submicron and Deep-Submicron Conventional/ldd MOSFET

Optimization of Impact Ionization in Metal–Oxide–Semiconductor Field-Effect Transistors for Improvement of Breakdown Voltage and Specific On-Resistance

A New Shallow Trench and Planar Gate Mosfet Structure Based on Vdmos Technology

Simulation Study of A 1200V 4H-SiC Lateral MOSFET With Reduced Saturation Current

A Higher Breakdown Voltage and Lower Specific on Resistance Superjunction MOSFET with Non-normal Breakdown Voltage Distribution

Enhancement of Electrical Safe Operation Area of 60 V nLDMOS by Engineering of Reduced Surface Electrical Field in the Drift Region

New Power MOSFET with Beyond-1D-Limit RSP-BV Trade-Off and Superior Reverse Recovery Characteristics.

CMOS-compatible Ehancement-Mode GaN-on-Si MOS-HEMT with High Breakdown Voltage (930V) Using Thermal Oxidation and TMAH Wet Etching

A Lateral Power P-Channel Trench MOSFET Improved by Variation Vertical Doping

Improved Blocking and Switching Characteristics of Split-Gate 1.2kV 4H-SiC MOSFET with a Deep P-well

A Viable Self-aligned Bottom-Gate MOSFET Technology for High Density and Low Voltage SRAM

An elevated source/drain-on-insulator structure to maximize the intrinsic performance of extremely scaled MOSFETs