Abstract:In this study, a high-performance Mg–8Gd–2Y–1Zn–6Li (wt%) alloy having a TYS of 202 ± 2.6 MPa, UTS of 243 ± 2.1 MPa and EL of 10.7 ± 2.3% was successfully fabricated by casting, heat treatment and hot extrusion. The effects of intermetallic compounds on microstructure and mechanical properties were deeply investigated. The results show that the studied alloy consists of coarse deformed α-Mg grains with (0001) basal texture, fine recrystallized β-Li grains with (002) texture and three Mg3RE phase variants, which are bulk Mg3RE phase with a size range of 10–30 µm, spot Mg3RE phase with a size range of 1–2 µm and spherical Mg3RE phase with a size range of 0.3–1 µm, respectively. The spherical Mg3RE phase has a strong dispersion strengthening effect, while the bulk Mg3RE phase acts as crack resources and deteriorates the ductility. A novel island-like <math>β1R</math> phase (FCC, a = 0.78 nm) is found for the first time in the Mg-Gd-Li based alloys. It has a coherent <math>(1̅12)β1R</math>//<math>(101̅0)α</math> interface at the broad facet and a semi-coherent <math>(1̅11)β1R</math>//<math>(112̅0)α</math> interface at the end facet. The <math>β1R</math> phase transforms from <math>βH</math> phase at the semi-coherent interface by atomic shear of RE and Mg atoms. The <math>β1R</math> phase provides a significant precipitation strengthening effect to the studied alloy, while the dissolution of <math>β1R</math> phase results in the age-softening phenomenon. The high-performance of the studied alloy is mainly attributed to the α/β duplex structure, three Mg3RE phase variants, and <math>β1R</math> phase.

Stable Icosahedral Phase in Mg–Zn–Gd Alloy

Microstructure Evolution and Properties of Mg-9Gd-0.8Al Alloy with Lamellar Phase During Extrusion at Different Temperatures

Microstructure and Tensile Properties of As-Extruded Mg–Li–Zn–Gd Alloys Reinforced with Icosahedral Quasicrystal Phase

Icosahedral quasicrystal structure of the Mg40Zn55Nd5 phase and its thermodynamic stability

Effect of quasicrystal and Laves phases on strength and ductility of as-extruded and heat treated Mg–Zn–Gd-based alloys

Secondary Phases in Quasicrystal-Reinforced Mg–3.5Zn–0.6Gd Mg Alloy

Effects of extrusion on the microstructure and mechanical properties of Mg–Zn–Gd alloy reinforced with quasicrystalline particles

Microstructure Evolution and Mechanical Properties of Quasicrystal-Reinforced Mg–Zn–Gd Alloy Processed by Cyclic Extrusion and Compression

Growth and morphology evolution of icosahedral quasicrystal phase in Mg 30Zn 60Y 10 alloy

Growth and Morphology Evolution of Icosahedral Quasicrystal Phase in Mg_(30)Zn_(60)Y_(10) Alloy

Deformation Behavior of Mg–Zn–Gd-based Alloys Reinforced with Quasicrystal and Laves Phases at Elevated Temperatures

Effect of Icosahedral Quasicrystalline Fraction and Extrusion Ratio on Microstructure, Mechanical Properties, and Anisotropy of Mg-Zn-Gd-Based Alloys

Atomic-scale Insights on the Plate-Shaped Γ″ Phase in Mg–Gd–Y–Ag–Zr Alloy

The effect of nanoquasicrystals on mechanical properties of as-extruded Mg-Zn-Gd alloy

The Formation Mechanism of a Novel Interfacial Phase with High Thermal Stability in a Mg-Gd-Y-Ag-Zr Alloy

Microstructures and mechanical properties of as-extruded Mg–8Gd–2Y–1Zn–6Li alloy

Formation of a Novel X Phase in Mg–Gd–Zn–Zr Alloy

Dislocations in Icosahedral Quasicrystalline Phase Embedded in Hot-Deformed Mg Alloys

Microstructure and Phase Transformation of Forged Mg–3.7Zn–0.3Y–0.3Gd Quasicrystal Alloy

The Strengthening Effect of Icosahedral Phase on As-Extruded Mg–Li Alloys

Deformation Behavior and Texture Randomization of Mg–Zn–Gd Alloys Reinforced with Icosahedral Quasicrystal