Abstract:Complex physical and mathematical concepts of quasicrystals have been applied, for the first time, to an engineering processing of an alloy containing a quasicrystalline phase. Icosahedral quasicrystals ( i -phase), which are quasiperiodic and possess fivefold symmetry, are often found as stable phase in aluminum and magnesium alloys. They are known to be hard and brittle at room temperature, therefore their deformation behavior at lower temperatures is not well understood yet. High pressure torsion (HPT) gives an opportunity to study deformation of brittle materials due to confinement of the dies. Here, we report on deformation behavior of 27 vol% eutectic i -phase present in a magnesium alloy Mg-12Zn-2Y (at%) subjected to HPT under 5 GPa pressure at RT with a number of rotations N. The matrix -Mg phase deformed by twinning and dislocation slip, leading to full recrystallization. Consequently, diffraction peaks showed broadening, followed by sharpening. The peaks of i -phase continued to broaden. Fivefold symmetry diffraction peaks broadened disproportionately to the others. Peak broadening analysis showed that deformation occurs predominantly by changes in fivefold symmetry planes, as observed to be by twinning and formation of narrow planar faults. No evidence of new random phason strains was detected. Introduction of localized phonon strain was detected at high strains, which could be correlated with creation of interfaces and surfaces by fragmentation of i -phase into nanoparticles and dispersion into the matrix. Vickers microhardness of the alloy increased from 118 Hv to over 175 Hv after N = 40.

Icosahedral quasicrystal structure of the Mg40Zn55Nd5 phase and its thermodynamic stability

Quasicrystal-reinforced Mg alloys

Microstructure and Phase Transformation of Forged Mg–3.7Zn–0.3Y–0.3Gd Quasicrystal Alloy

Deformation behavior of Mg-Zn-Y icosahedral quasicrystal phase in a magnesium matrix by high pressure torsion at room temperature

Effect of quasicrystal and Laves phases on strength and ductility of as-extruded and heat treated Mg–Zn–Gd-based alloys

Quasicrystal phase evolution and mechanical properties of Mg-3.5Zn-0.6Gd alloy processed by high-pressure torsion

Crystal structure and stability of phases in Mg-Zn alloys: A comprehensive first-principles study

Five-fold symmetry structure inhibiting the growth of an otherwise perfect η 2 phase in Al-Zn-Mg-Cu alloys

A Near-bulk Quasicrystal Alloy Formed in Zn-Mg-Y System

Effect of Icosahedral Phase on Crystallographic Texture and Mechanical Anisotropy of Mg–4%Li Based Alloys

Formation mechanism of the quasicrystal in Al-Cu-Mg-Zn aluminum alloy resistance spot weld

Near-equiatomic high-entropy decagonal quasicrystal in Al 20 Si 20 Mn 20 Fe 20 Ga 20

Tension/Compression Difference in Creep Resistances of Wrought Mg-Zn-Based Alloy with Icosahedral Quasicrystal Phases

Microstructure and phase transformation of as-cast and annealed Mg–4Zn–1Y alloy containing quasi-crystal phase

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Structural relationships among monoclinic and hexagonal phases and transition structures in Mg-Zn-Y alloys

The Crystal Structure, Microhardness and Thermal Stability of the Ti26Al55Zn19 Alloy

Formation and stability of icosahedral phase in Al65Ga5Pd17Mn13 alloy

A hexagonal phase related to quasicrystalline phases in Zn-Mg-rare-earth system

Orientation relationships between icosahedral clusters in hexagonal MgZn2 and monoclinic Mg4Zn7 phases in Mg-Zn(-Y) alloys

Effects of extrusion on the microstructure and mechanical properties of Mg–Zn–Gd alloy reinforced with quasicrystalline particles