Abstract:Zn2TiO4 spinel (Zn2TiO4-Sp) was synthesized by a solid-state reaction method (1573 K, room P and 72 h) and quasi-hydrostatically compressed to ~24 GPa using a DAC coupled with a synchrotron X-ray radiation (ambient T). We found that the Zn2TiO4-Sp was stable up to ~21 GPa and transformed to another phase at higher P. With some theoretical simulations, we revealed that this high-P phase adopted the CaTi2O4-type structure (Zn2TiO4-CT). Additionally, the isothermal bulk modulus (K T) of the Zn2TiO4-Sp was experimentally obtained as 156.0(44) GPa and theoretically obtained as 159.1(4) GPa, with its first pressure derivative \(K_{\text{T}}^{'}\) as 3.8(6) and 4.37(4), respectively. The volumetric and axial isothermal bulk moduli of the Zn2TiO4-CT were theoretically obtained as K T = 150(2) GPa (\(K_{\text{T}}^{'}\) = 5.4(2); for the volume), K T-a = 173(2) GPa (\(K_{{\text{T-}}a}^{'}\) = 3.9(1); for the a-axis), K T-b = 74(2) GPa (\(K_{{\text{T-}}b}^{'}\) = 7.0(2); for the b-axis), and K T-c = 365(8) GPa (\(K_{{\text{T-}}c}^{'}\) = 1.5(4); for the c-axis), indicating a strong elastic anisotropy. The Zn2TiO4-CT was found as ~10.0 % denser than the Zn2TiO4-Sp at ambient conditions. The spinel and post-spinel phase assemblages for the Zn2TiO4 composition at high T have been deduced as Zn2TiO4-Sp, ZnTiO3-ilmenite + ZnO-wurtzite, ZnTiO3-ilmenite + ZnO-rock salt, ZnTiO3-perovskite + ZnO-rock salt, and Zn2TiO4-CT as P increases, which presumably implies a potential stability field for a CT-type Mg2SiO4 at very high P.

Titanium Incorporation in Zn2TiO4 Spinel Ceramics

Effects Of Catio(3)On Microstructures And Properties Of (1-X) Znal2o4-Xmg(2) Tio4 (X=0.1) Microwave Dielectric Ceramics

Preparation, microstructure and microwave dielectric properties of ZrxTi1-xO4 (x=0.40-0.60) ceramics

Improved Sinterability and Microwave Dielectric Properties of [zn0.5ti0.5]3+‐doped ZnAl2O4 Spinel Solid Solution

Influence of (Zn0.5Ti0.5)3+substitution on structural evolution, bond characteristics, and microwave dielectric properties of spinel Li (Zn0.5Ti0.5)xGa5-xO8 solid solutions

Influence of (Zn0.5Ti0.5)3+ substitution on structural evolution, bond characteristics, and microwave dielectric properties of spinel Li(Zn0.5Ti0.5) Ga5-O8 solid solutions

Microstructure and Microwave Dielectric Properties of Tio2-Doped Zn2sio4 Ceramics Synthesized Through the Sol-Gel Process

Influence of Zn0.5Ti0.5NbO4 on the Structure and Microwave Dielectric Properties of ZrTiO4 Ceramics

Synthesis, formation and characterization of ZnTiO3 ceramics

Densification and microstructural correlation with thermo-mechanical strength of TiO2-doped (Al1-xCrx)2O3 (x=0.1, 0.3) solid solution ceramics

Effect of Cation Occupancy on Crystal Structure and Microwave Dielectric Characteristics of Spinel-Structured (1-X)zn2tio4-xli2mgti3o8 Ceramics

High-Q microwave dielectric properties in the Na0.5Sm0.5TiO3 + Cr2O3 ceramics by one synthetic process

Spinel and Post-Spinel Phase Assemblages in Zn2TiO4: an Experimental and Theoretical Study

Effects of Ti<sup>4+</sup> Substitution on Microstructure and Microwave Dielectric Properties of ZnNb<sub>2(1-x)</sub>TixO<sub>(6-3x)</sub> Ceramics

Enhancement of the Cation Order and the Microwave Dielectric Properties of Li2ZnTi3O8 Through Composition Modulation

Solid-phase Synthesis and Characterization of ZnO-TiO 2 System

Co 2 O 3 substitution effects on the structure and microwave dielectric properties of low-firing (Zn 0.9 Mg 0.1 )TiO 3 ceramics

Effects of Ti4+ substitution on microstructure and microwave dielectric properties of ZnNb2(1-x)TixO(6-3X) ceramics

Effect of composition on sinterability, microstructure and microwave dielectric properties of Zr x Ti1− x O4 (x=0.40–0.60) ceramics

Equations of State of Co 2 TiO 4 -Sp, Co 2 TiO 4 -CM, and Co 2 TiO 4 -CT, and Their Phase Transitions: an Experimental and Theoretical Study