Abstract:Ti3SiC2/Al2O3 composites attract attention because Ti3SiC2 and Al2O3 have complementary advantages in mechanical properties. However, the high temperatures (≥1400 °C) required for densification of the Al2O3 lead to the decomposition of Ti3SiC2. To address this issue, Ti3(Al1-xSix)C2/Al2O3 composites were fabricated via current-assisted sintering of Ti3AlC2/SiO (TM sample) and Ti3AlC2/SiO2 (TD sample) at 1100–1300 °C. After sintering, most Al atoms in Ti3AlC2 were substituted by Si atoms, forming Ti3(Al1-xSix)C2 with values of x greater than 0.85. However, the morphologies of Al2O3 produced from Ti3AlC2/SiO and Ti3AlC2/SiO2 were different. Spherical Al2O3 produced by Al–Si substitution in SiO2 was difficult to densify at low temperatures, whereas the reaction between Ti3AlC2 and SiO disintegrated the matrix of SiO and produced dense Al2O3. As a result, the relative densities and mechanical properties of TM samples were less affected by a reduction in sintering temperature than those of TD samples. As sintering temperature declined from 1300 °C to 1100 °C, flexural strength, hardness, and fracture toughness of TM samples decreased by 35.9% (from 546.2 MPa to 350.0 MPa), 27.4% (from 4.56 GPa to 3.31 GPa), and 33.4% (from 7.45 MPa m0.5–4.96 MPa m0.5), respectively. Meanwhile, the flexural strength, hardness, and fracture toughness of TD samples were reduced by 81.2% (from 466.1 MPa to 87.6 MPa), 85.4% (from 6.50 GPa to 0.95 GPa), and 68.6% (from 6.94 MPa m0.5–2.18 MPa m0.5), respectively. Therefore, Ti3AlC2/SiO is more suitable for fabricating Ti3(Al1-xSix)C2/Al2O3 composites at low temperatures.

Densification and microstructural correlation with thermo-mechanical strength of TiO2-doped (Al1-xCrx)2O3 (x=0.1, 0.3) solid solution ceramics

Microstructure and mechanical properties of dense ZTA ceramics with high Cr2O3 solution

Microstructures and mechanical properties of Ti3(Al,Si)C2/Al2O3 composites fabricated by current-assisted sintering of Ti3AlC2/SiO and Ti3AlC2/SiO2

Impacts of Al2O3 Doping on Microstructure, Phase Constitution and Microwave Dielectric Properties of Ca0.61Nd0.26TiO3 Ceramics

Fabrication of Porous Al2TiO5-Al2O3 Ceramics Using Al2O3 Hollow Spheres Coated with TiO2 Sol

Characterization and Microwave Dielectric Properties of TiO2-modified 0.65catio3–0.35sm0.9nd0.1alo3 Ceramics

Microstructure characterization and mechanical properties of in situ synthesized Ti2(Al,Si)C reinforced Al composites

Microstructure Transformation and Mechanical Properties of TiC–TiB2 Ceramics Prepared by Combustion Synthesis in High Gravity Field

Sol–gel Synthesis and Characterization of Ba(1−x)SrxTiO3 Ceramics

Mechanical Properties and Oxidation Behavior of Ti-Doped Nb4alc3

Effect of NiO and Al2O3 on the Curie temperature, microstructure, and dielectric properties of Ba0.5Sr0.5TiO3 ceramics

Preparation, microstructure and microwave dielectric properties of ZrxTi1-xO4 (x=0.40-0.60) ceramics

PREPARATION AND PROPERTIES OF ALUMINUM TITANATE SOLID SOLUTION CERAMICS

Synthesis of Ti2(In Al1-)C (x = 0–1) solid solutions with high-purity and their properties

Characterization of structure, chemical bond and microwave dielectric properties in Ca<sub>0.61</sub>Nd<sub>0.26</sub>TiO<sub>3</sub> ceramic substituted by chromium for titanium

Characterization of CaTiO3-NdAlO3 Dielectric Ceramics

Densification, Microstructures, and Mechanical Properties of (zr, Ti)(C, N) Ceramics Fabricated by Spark Plasma Sintering

Insights into the Mechanical Properties and Thermal Transport of Ti3(Al1-xAx)C2 Solid Solutions: A Comprehensive Theoretical Study Combined with Experiment

Structure and Microwave Dielectric Characteristics of Solid Solutions in SrNdAlO4‐Sr2TiO4 System

Effects of Y2O3 on the Densification and Fracture Toughness of SPS-sintered TiC