Abstract:Floating catalyst chemical vapor deposition (FCCVD) has been widely used for the growth of various carbon nanotube (CNT) macrostructures, mainly including vertically aligned CNT (VACNT) arrays and none-woven CNT films. However, it is still unclear for the reason why these CNT macrostructures with largely different morphologies were received via the similar method. In this research, it revealed that the growth temperature largely affected the nucleation status of floating catalysts and thus controlled the morphologies of CNT macrostructures from VACNT arrays to none-woven CNT films. In low temperatures (below 800 degrees C), VACNTs were grown by bottom-up mechanism with several CNTs, but not one individual from bottom to up along the array height direction. Furthermore, VACNT arrays were only grown on some substrates that can induce iron atoms aggregating to catalyst particles with a suitable size. When increasing the growth temperature higher than 800 degrees C, more catalyst particles were nucleated in the gas flow, which induced the formation of none-woven CNT films composed of thin CNTs (single-walled CNTs and double-walled CNTs). This research was significative for understanding CNT growth mechanism via FCCVD process and the synthesis of different CNT macrostructures by this strategy. (C) 2015 Elsevier B.V. All rights reserved.

Radial growth of vertically aligned carbon nanotube arrays from ethylene on ceramic spheres

Alcohol-Assisted Rapid Growth of Vertically Aligned Carbon Nanotube Arrays

Growth of Super Long Vertically Aligned Carbon Nanotube Arrays from Cyclohexane Via Floating Catalyst Method

Vertically aligned carbon nanotube arrays grown on a lamellar catalyst by fluidized bed catalytic chemical vapor deposition

Growth Mechanism and Kinetics of Vertically Aligned Carbon Nanotube Arrays

Rapid Growth of Well-Aligned Carbon Nanotube Arrays

Large Scale Synthesis of Vertical Aligned CNT Array on Irregular Quartz Particles

Carbon dioxide-boosted growth of high-density and vertically aligned carbon nanotube arrays on a stainless steel mesh

Uniform Patterned Synthesis of Vertically-Aligned Carbon Nanotubes on Low-Stress Micromechanical Structures

Uniform Patterned Growth of Carbon Nanotubes Without Surface Carbon

Integrating Vertically Aligned Carbon Nanotubes on Micromechanical Structures

Preferential Growth of Carbon Nanotubes/Nanofibers Using Lithographically Patterned Catalysts

Rational Control on Floating Catalysts for the Growth of Carbon Nanotube Assemblies: from Vertically Aligned Carbon Nanotube Arrays to Carbon Nanotube Films

Growth Process Conditions of Vertically Aligned Carbon Nanotubes Using Plasma Enhanced Chemical Vapor Deposition

Synthesis of Vertically-Aligned Cnt Arrays from Diameter-Controlled Fe3o4 Nanoparticles

Large Area Growth of Aligned CNT Arrays on Spheres: Towards the Large Scale and Continuous Production

Large Area Growth of Aligned CNT Arrays on Spheres: Cost Performance and Product Control

Synthesis of Vertically Aligned Carbon Nanotube Arrays on Silicon Substrates

Mass Production of Aligned Carbon Nanotube Arrays by Fluidized Bed Catalytic Chemical Vapor Deposition

Large scale intercalated growth of short aligned carbon nanotubes among vermiculite layers in a fluidized bed reactor

Large Scale Production of Carbon Nanotube Arrays on the Sphere Surface from Liquefied Petroleum Gas at Low Cost