Abstract:An attempt is made in this study to research the performance of prestressed concrete pipe piles based on 10,333 pile tests. Short and medium-length piles with slenderness ratios ranging from 10 to 90 are most widely used, and the optimal length is between the range of 10~50 m. For the same bearing stratum and diameter, the capacity of pile increases with increasing pile length until a limiting value is achieved. The average pile-top settlement is approximately in the range of 10 ~ 25 mm, and the rebound rates for piles with various lengths are similar. The results show that the diameter of Φ400 and Φ500 is most widely used, accounting for 33.8% and 46.1%, respectively, and the optimal length is between the range of 10 ~ 50 m. Under conditions of, when the bearing stratum is clay, the bearing capacity of pipe piles increases with an increase in length to diameter ratio; when sandy soil, the bearing capacity firstly increases and then decreases; when with the same length to diameter ratio, the bearing capacity increases in both cases, and the latter is higher than the former. There is a large discreteness in settlement of pile top, and the average value is normally about 10 ~ 25 mm, without significant relationship with the bearing stratum. The results of statistical research will be a reliable reference for pipe pile research, design and construction in soft soil area. The results are expected to improve the understanding of prestressed concrete pipe piles and facilitate the design process.

Technology Process and Plant Layout for Production of Large Diameter PCCP

Application of Large-Diameter Thin-Wall Cast-in-situ Concrete Pipe Piles in Ocean Structures

Steel Pipe Node Test of the 500 Kv Hanjiang River Crossing Tower Steel

Statistical research on performance of prestressed concrete pipe piles

Study on Structural Safety and Quality Control of Large Diameter PCCP

Pile-Planting Construction Method of Concrete-Filled Steel Pipe Piles of Qiandao Lake Bridge

Construction Technique of Using POCP As the Mold of Tunnel Lining in South-to-North Water Transfer Project

Design of a Large Diameter Steel Reinforced Plastic Pipe

STUDY ON APPLICATION OF CONCRETE FILLED PRESTRESSING STEEL TUBULAR STRUCTURE

On Quality Control and Application Perspective in Large-Pore Steel Corrugated Pipe Culvert Construction

Innovative Design of Pipe Piles Combined Both the Effect of Pile Foundation and Composite Foundation for Soft Soil Treatment

Embankment Technique of Shell Tubular Pile of Large-Diameter Placing-in-Situ Concrete

Design and Construction Technology of Large-diameter Non-excavated Tractive Pipe

Calculation Method of Prestressed Concrete Cylinder Pipe

Field Behavior of Driven Prestressed High-Strength Concrete Piles in Sandy Soils

Research and Application of Edge Plane Shape Control Method of High Grade Pipeline Steel

Development and Engineering application of C70 steel pipe High Strength and High Performance Concrete

Preparation of C80~C100 High Performance Concrete and the Ultrahigh Pumping Technology

Development of Manufacture Technology for Main Pipe of Large-sized Nuclear Power

WELDING TECHNOLOGY OF LARGE CAST-STEEL AND SEAMLESS STEEL PIPE CONNECTION

Quality Control for Fabricating Large Diameter Bored Piles in Collapsible Sand Layer Areas