Abstract:A unique pit-in-pit (PIP) excavation, which comprised a large diameter circular pit outside and a smaller deeper rectangular pit inside, was constructed in clay-gravel-cobble mixed strata. To guarantee project safety as well as characterize behavior of PIP excavation, investigate influence of inner pit excavation on outer pit performance and explore lateral earth pressure mobilized in discrete geomaterials, this project was extensively instrumented throughout construction. Field data indicated that it performed distinctly from those excavations in literature. This excavation caused relatively smaller wall and ground displacements, both of which featured distinctive profiles; current empirical and semi-empirical approaches for predicting excavation performance were not applicable to this case any more. To control performance of PIP excavation, it is of paramount importance to limit lateral wall movement of inner pit. Contrary to previous recognition, basal rebound due to excavation took place not only in soft clay, but also in stiff to hard clay, clay-gravel-cobble mixtures, and even decomposed bedrock. Different from those in fine grained soils, magnitudes of lateral earth pressures against retaining wall in clay-gravel-cobble mixtures showed a wide range of scattering and their thrusts were transferred to wall mainly via contact force of rock particles. Classic Rankine theory substantially underestimated while current empirical apparent earth pressure (AEP) diagrams highly overestimated magnitude of lateral active earth pressure of clay-gravel-cobble mixtures. For design of PIP excavation, the ground between inner and outer retaining walls should be treated as the passive state during excavation of outer pit, while as the active state during subsequent excavation of inner pit when greater increment of deflection occurred to inner wall than outer wall. Casting head of inner wall inside base slab of outer pit prior to excavation of inner pit was a cost-effective solution for enhancing excavation performance; socketing wall toe into underlying decomposed bedrock significantly mitigated potential risk associated with wall kicking.

Embankment Technique of Shell Tubular Pile of Large-Diameter Placing-in-Situ Concrete

Construction Techniques for Reinforcement of Foundation of Existing Bridge Pile with Microsteel-Piped Pile

Pile-Planting Construction Method of Concrete-Filled Steel Pipe Piles of Qiandao Lake Bridge

Application of Large-Diameter Thin-Wall Cast-in-situ Concrete Pipe Piles in Ocean Structures

Cantilever erection method and analysis of construction intern al forces for large-span spherical reticulated shells

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

Application of Cylinder Piles in the Golden Harbor Bay Sea Reclamation Project of Yu-huan Seashore New City

STUDY ON VERTICAL BEARING CAPACITY OF LARGE-DIAMETER CAST-IN-SITU THIN-WALL TUBULAR PILE

Performance analysis of cast-in-place tubular pile composite ground under embankment load

Analysis of cast-in-situ tubular piles in soft foundation improvement at bridge approaches

STUDY ON SINGLE RIGID PILE GROUND IMPROVEMENT MODEL UNDER EMBANKMENT

Innovative Design of Pipe Piles Combined Both the Effect of Pile Foundation and Composite Foundation for Soft Soil Treatment

Working mechanism of tubular pile-supported embankment

The Performance of T-shaped Deep Mixed Soil Cement Column-Supported Embankments on Soft Ground

The engineering characteristic of precast tubular pile and mixing cement pile composite foundation for deep soft ground

Concrete-Filled Steel Tube cap pile application in engineering

Analysis of Axial Load-Transfer of Large-Diameter Cast-in-situ Tubular Pile

Composite Foundation of Deep Mixing Piles for Large Steel Oil Tanks on Soft Ground

Engineering Character of a New-Style Pretensioned Spun Concrete Nodular Pile

Investigation on Performance of a Large Circular Pit-in-pit Excavation in Clay-Gravel-cobble Mixed Strata

Field Test on Technique of Cap-Pile Supported Embankment