Abstract:<p>Prestressed concrete cylinder pipes (PCCPs) are widely used in large-scale water conveyance projects. It is important to study the mechanical properties and loading response of PCCPs to ensure trouble-free operation. There were insufficient test data pertaining to the deformation of the concrete cores (including the inner and the outer concrete core), the prestressing wire, the mortar coating, especially the steel cylinder. In this paper, a full-scale test was performed on a PCCP under internal water pressure through fiber Bragg grating (FBG) sensing technology. The test results showed that the state of PCCPs would reach three limit-states successively. Firstly, the strains of the concrete cores, the prestressing wire, the steel cylinder and the mortar coating increased linearly with the growth of the internal water pressure. The cracks in the concrete cores indicated the beginning of the serviceability limit-state. The corresponding pressure is 1.8 MPa. The growth of the internal water pressure primarily affected the steel cylinder and the prestressing wire during the continuous period. When the steel cylinder yielded at the pressure of 2.25 MPa, the pipe reached its elastic limit-state. At last, the strength of the pipe decreased obviously as the cracks propagated throughout the concrete cores. The pipe would come to the strength limit-state until the prestressing wire yielded. The test results found that the internal water pressure relieved final prestress of the inner concrete core was different from that of the outer concrete core in the embedded-cylinder pipe (ECP). It was also proved that FBG sensing technology could be the continuous monitoring system for the condition assessment of PCCPs. In particular, the test results demonstrated that the appropriate quality of materials and proper operation guaranteed trouble-free operation of PCCPs. The objective of this research is to provide experimental references for the application of PCCPs and push back safety assessment of this type of large-diameter pipes.</p>

Calculation Method of Prestressed Concrete Cylinder Pipe

Statistical research on performance of prestressed concrete pipe piles

Analytical Calculation Method of Seismic Resistant Response for Posttensioned Precast Bridge Piers

A PRACTICAL CALCULATION METHOD OF PRE-STRESS CONCRETE STRUCTURE CONSIDERING TEMPERATURE INTERNAL FORCE WITH PKPM(PREC)SOFTWARE

A NEW CALCULATION METHOD FOR LARGE-DIAMETER-TUBULAR-PILE BEARING CAPACITY

A study of the ultimate compressive strain of local buckling in strain-based design of pipelines

Comparative Study of Three Methods for the Prestressing Simulation in the Analysis of Load-Bearing Response of a PCCP

Study on Drag Coefficient and Roughness of Prestressed Concrete Cylinder Pipe

Field Behavior of Driven Prestressed High-Strength Concrete Piles in Sandy Soils

Construction Technique of Using POCP As the Mold of Tunnel Lining in South-to-North Water Transfer Project

LRFD Approach to CFRP Renewal of Prestressed Concrete Cylinder Pipes

Calculation for Prestressed Concrete Structures Based on Time-dependent Aanlysis

Study on calculation methods of ground deformation induced by pipe jacking construction

Mechanical properties and loading response of prestressed concrete cylinder pipes under internal water pressure

Technology Process and Plant Layout for Production of Large Diameter PCCP

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Discussion on friction head loss calculation for large diameter PCCP

Mechanical responses of bell‐and‐spigot joints in buried prestressed concrete cylinder pipe under coupled service and surcharge loads

Development of Calculation Program for LBB Crack Opening Area and Leak Rate of Nuclear Pipes

Study on Structural Safety and Quality Control of Large Diameter PCCP

Calculation Methods for the Permeability Coefficient of Concrete Face Rockfill Dam with Cracks