Abstract:A large number of gas drainage pipes are obsoleted in the coal mine gas drainage system, and it causes serious waste. If concrete is poured into the discarded gas drainage pipes as components for underground roadway support, it is very significant for sustainable development of mine. Therefore, it is necessary to study the mechanical properties of the concrete-filled gas drainage steel pipe. Most frequently used gas drainage pipes are spiral welded steel pipe (SSP-I) and spiral external rib steel pipe (SSP-II). In this study, three different concrete-filled steel pipes are taken as the research object: SSP-I concrete-filled steel pipes, SSP-II concrete-filled steel pipes, and RSP concrete-filled ordinary round steel pipes. Through the axial compression test, the failure mode and relationship between stress-strain of concrete-filled steel pipes were obtained. Subsequently, the ultimate bearing capacity of three types of specimens was calculated based on the unified strength theory, limit equilibrium theory, and superposition theory. The test results show that both the SSP-I concrete-filled pipe columns and RSP concrete-filled pipe have good post-peak load-bearing capacity and ductility, and the second peak load reaches 70.38% and 81.92% of the ultimate load, respectively. The load-bearing capacity of SSP-II concrete-filled pipe columns is dropped sharply after bearing ultimate load, and the second peak load reaches only 36.47% of the ultimate load. The failure characteristics of concrete-filled gas drainage pipe columns show that the core concrete is compressed to powder and explain that the gas drainage pipe has fully exerted its restraint on the concrete. The FE method was used to simulate the compression test of three types of concrete-filled steel pipes, and the numerical simulation results show good agreement with the experimental results. Theoretical calculations show that the calculation of concrete-filled gas drainage pipe columns based on the superposition theory EC4-2004 is the closest to the measured value. Therefore, the EC4-2004 standard is recommended to calculate the ultimate bearing capacity of concrete-filled gas drainage pipe columns.

Study on Drag Coefficient and Roughness of Prestressed Concrete Cylinder Pipe

Statistical research on performance of prestressed concrete pipe piles

Discussion on friction head loss calculation for large diameter PCCP

Calculation Method of Prestressed Concrete Cylinder Pipe

Field Behavior of Driven Prestressed High-Strength Concrete Piles in Sandy Soils

Numerical Study of Resistance Loss and Erosive Wear during Pipe Transport of Paste Slurry

CFD-DEM Analysis of Hydraulic Conveying Bends: Interaction Between Pipe Orientation and Flow Regime

Three-dimensional Hydrodynamic Model of Concrete Tetrahedral Frame Revetments

Three-dimensional Numerical Analysis on a New Design of Hydraulic Structure for Water Treatment

LRFD Approach to CFRP Renewal of Prestressed Concrete Cylinder Pipes

Mechanical properties and loading response of prestressed concrete cylinder pipes under internal water pressure

Experimental Study Of Correlation Of Dynamic Compaction For Foundation Backfilled With Crushed Stone

Field Behavior of Pre-Stressed High-Strength Concrete Nodular Piles and PHC Pipe Piles Under Compression in Soft Soil Areas

Uncertainty in Design Value of Roughness Coefficient for Large Scale Channel and Effects Analysis

Study on pumping wear characteristics of concrete pipeline based on CFD-DEM coupling

Design and construction of precast reinforced concrete drain pipe in water conservancy project

A Study on Axial Compression Performance of Large Diameter-Thickness Ratio Concrete-Filled Gas Drainage Steel Pipe

Distribution of Drag Coefficients along a Flexible Pipe with Helical Strakes in Uniform Flow

Study on Key Properties and Model Establishment of Innovative Recycled Aggregate Pervious Concrete

Construction Technique of Using POCP As the Mold of Tunnel Lining in South-to-North Water Transfer Project

Analysis on Performance of Large Diameter Concrete Jacking Pipe