Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

STUDY ON APPLICATION OF CONCRETE FILLED PRESTRESSING STEEL TUBULAR STRUCTURE

SIMULATION ANALYSIS FOR MECHANIC BEHAVIOR OF CONCRETE-FILLED STEEL TUBULAR ARCH BRIDGE DURING THE COURSE OF CORE CONCRETE PUMPING

Analytical Study of Circular Concrete-Filled Steel Tube Stub Columns under Axial Compression

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Development of confined CFST columns

Study on prestressed steel reinforced concrete structures subjected to bending moment

Concrete Filled Steel Tubular Structures from Theory to Practice

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Summary of Research Status of Concrete Filled Steel Tubular Truss Structure

Study on Method of Simulating Spatial Effect of Prestressing Force in Bridge

Theory Of Concrete-Filled Steel Tubular Structures In China

Design Of Concrete-Filled Steel Tubular Chs Connections In Tension

Primary discussion of construction mechanics of concrete -filled steel tubular structures

Research on Spatial Effect of Prestressing Force in Long-Span Concrete Bridge

Study on Mechanical Properties of Concrete-Filled Steel Tubular Members under Axial Tension

Recent Developments in Concrete-Filled Steel Tubular Structures in China

Research and Application of Long-Span Steel-Concrete Spatial Composite Structures

Several Key Issues On Modern Concrete-Filled Steel Tubular Structures

Concrete-filled Tubular Members and Connections

Research on seismic performance of prefabricated concrete-filled steel tubular frame joints

Research on Reinforced Concrete Beam-Steel Tube Concrete Column Node