Abstract:A series of samples, prepared from mechanical mixtures of inorganic salts (MoO3, CuCl2, NiCl26H2O, and Ni(NO3)26H2O) with zeolites (NaZSM-5, NaY, NaY, and MCM-41), have been investigated by X-ray diffraction (XRD), differential thermal analysis (DTA), the adsorption of probing molecules, and the determination of pore size distribution. After the heating of MoO3with zeolites at 723 K for 24 h, the samples (MoO3/NaZSM-5/NaY/MCM-41=0–0.088/0–0.24/0–0.45 g/g) show only those X-ray peaks assigned to zeolites, the characteristic peaks of MoO3having disappeared completely, which suggests that MoO3is highly dispersed in the pores of zeolites. Similar phenomena are observed for the samples of CuCl2/NaZSM-5, CuCl2/NaY, NiCl2/NaZSM-5, NiCl26H2O/NaY, and Ni(NO3)26H2O/NaY. In contrast, the inorganic salts of NiCl26H2O and Ni(NO3)26H2O cannot be dispersed into the channels of NaZSM-5 zeolite due to the limitation of the channel size. These results suggest that the dispersion only occurs under the condition that the diameter of the inorganic salts is less or similar to the pore size of the zeolites. Also, we observed that the dispersion capacity of the inorganic salts is strongly related to the pore size of the zeolites. Furthermore, the isotherms for probing molecules show that the dispersion of inorganic salts into zeolites leads to significant change in the pore size of zeolites. The MoO3/NaY samples exhibit that the pore size was selectively formed at 6.8–8.0, 6.0–6.8, 4.3–6.0, and 3.0–4.3 Å with MoO3loading at 0.08, 0.16, 0.21, and 0.24 g/g, respectively. Therefore, it is proposed that we could modify the pore sizes of zeolites to various degrees, which may be very useful to design suitable pores of zeolites for the catalysts in catalytic reactions. Catalytic data in selective reduction of NO by propylene at the temperature of 300°C show that CuCl2/HZSM-5 catalyst prepared from the dispersion method exhibits much higher catalytic conversion (39%: N2yield) than that (21%: N2yield) of CuZSM-5 catalyst prepared from the ion-exchange method.

Zeolite pore size engineering by chemical liquid deposition

Fine control of zeolite pore size by chemical liquid deposition

Pore size control of NaY zeolite by chemical liquid deposition and shape-selective separation

Chemical Liquid Deposition Zeolites With Controlled Pore-Opening Size And Shape-Selective Separation Of Isomers

Rapid Synthesis of Small Zeolite Y Crystals in the Absence of Seed Gel

Studies on the Control of the Pore-opening Size of HM Zeolite and Its Para-selectivity

Hierarchical Shell-Like ZSM-5 with Tunable Porosity Synthesized by Using a Dissolution-Recrystallization Approach.

Preparation of Aluminosilicate Ferrierite Zeolite Nanosheets with Controllable Thickness in the Presence of a Sole Organic Structure Directing Agent

Hierarchical porous structures by using zeolite nanocrystals as building blocks

Sub-micron sized hierarchical porous ZSM-5 particles with controllable mesoporous structures by changing the alkalinity in the synthesis using NaOH

Chemical liquid deposition and hydrophobicity of zeolites

Synthesis,Properties,Assembly and Application of Nanosized Zeolite

Fine Control of Zeolite Pore-opening Size and Gas Separation

Dispersion of Inorganic Salts into Zeolites and Their Pore Modification

Preparation of Amphiphilic HZSM-5 Zeolite by Chemical Vapor Deposition of Trimethylchlorosilane

Tailoring the pore structure、morphology and acidity of MFI zeolites by the regulation of Si/Al ratio in the synthetic gel

Synthesis of Extra-Large Pore, Large Pore and Medium Pore Zeolites Using a Small Imidazolium Cation As the Organic Structure-Directing Agent

In-situ hierarchical pore engineering in small pore zeolite via methanol-mediated NH4F etching

Zeolites: Simple Strategies for Fabrication of a Periodic Mesoporous Aluminosilicate with Crystalline Walls (Small 21/2014)

The effect of hierarchical single-crystal ZSM-5 zeolites with different Si/Al ratios on its pore structure and catalytic performance

Chemical vapour deposition of Si(OEt)4 on zeolite Hβ