Abstract:A zeolite/polymer composite hollow fiber (CHF) support is used to investigate the effects of three different silica sources (sodium metasilicate nonahydrate, silica sol and sodium silicate) of the synthesis hydrogel on the properties of zeolite LTA membrane prepared on the outer surface of the support by in situ hydrothermal synthesis at 100°C. The as-synthesized membranes and powders from the synthesis hydrogel are characterized by X-ray diffraction. The morphology and thickness of the membranes are observed by scanning electron microscopy. The separation factor and flux are evaluated by pervaporation (PV) test at 75°C using 90wt.% ethanol aqueous solution. It is difficult to obtain high performance membranes on the CHF support using sodium metasilicate nonahydrate as silica source, while continuous zeolite membranes with high separation factor (>10,000) and flux (>6.4kg/m2h) can be well synthesized using silica sol or sodium silicate as silica source. The reason of these differences is further explored by changing the alkalinity of the synthesis hydrogel (the content of sodium hydroxide). It is found that the crystallization rate of the synthesis hydrogel is a crucial factor to obtain zeolite membranes with high PV performance by static in situ hydrothermal synthesis. The separation performance of the membrane synthesized even using sodium metasilicate nonahydrate as silica source can be greatly improved by dynamic hydrothermal synthesis using rotating autoclaves.

Chemical liquid deposition and hydrophobicity of zeolites

Tuning the Hydrophobicity of ZSM-5 Zeolites by Surface Silanization Using Alkyltrichlorosilane

Preparation of Amphiphilic HZSM-5 Zeolite by Chemical Vapor Deposition of Trimethylchlorosilane

[Preparation of Honeycombed Monolithic Zeolite and Hydrophobic Modification with SiCl4].

Preparation and Characterization of Amphiphilic HZSM-5 Zeolite with Various Si/Al Ratios

High-Surface-Area Zeolitic Silica with Mesoporosity

Chemical Liquid Deposition Zeolites With Controlled Pore-Opening Size And Shape-Selective Separation Of Isomers

A high‐resolution solid‐state NMR study on nano‐structured HZSM‐5 zeolite

Efficient Removal of Ionic Liquids from Aqueous Media Using ZSM-5 Zeolites: A Tunable Mechanism Combining Micropore Filling and Electrostatic Interaction

Fine control of zeolite pore size by chemical liquid deposition

Enhanced hydrophobic ZSM-5 with high capacity for toluene capture under high-humidity conditions

Development on hydrophobic modification of aluminosilicate and titanosilicate zeolite molecular sieves

Control of crystallization rate and morphology of zeolite silicalite-1 in solvent-free synthesis

Studies on the Control of the Pore-opening Size of HM Zeolite and Its Para-selectivity

Optimization of Conditions for Preparation of ZSM-5@silicalite-1 Core–shell Catalysts Via Hydrothermal Synthesis

Effects of the synthesis hydrogel on the formation of zeolite LTA membranes

Prepared hydrophobic Y zeolite for adsorbing toluene in humid environment

Evaluation of the Hydrophilic/Hydrophobic Balance of 13X Zeolite by Adsorption of Water, Methanol, and Cyclohexane as Pure Vapors or as Mixtures

Zeolite pore size engineering by chemical liquid deposition

On the Hydrophobicity of Mordenite

Synthesis of High-silica ZSM-5 Zeolite by Vapor-phase Transport Method