Abstract:A series of samples, prepared from mechanical mixtures of inorganic salts (MoO3, CuCl2, NiCl26H2O, and Ni(NO3)26H2O) with zeolites (NaZSM-5, NaY, NaY, and MCM-41), have been investigated by X-ray diffraction (XRD), differential thermal analysis (DTA), the adsorption of probing molecules, and the determination of pore size distribution. After the heating of MoO3with zeolites at 723 K for 24 h, the samples (MoO3/NaZSM-5/NaY/MCM-41=0–0.088/0–0.24/0–0.45 g/g) show only those X-ray peaks assigned to zeolites, the characteristic peaks of MoO3having disappeared completely, which suggests that MoO3is highly dispersed in the pores of zeolites. Similar phenomena are observed for the samples of CuCl2/NaZSM-5, CuCl2/NaY, NiCl2/NaZSM-5, NiCl26H2O/NaY, and Ni(NO3)26H2O/NaY. In contrast, the inorganic salts of NiCl26H2O and Ni(NO3)26H2O cannot be dispersed into the channels of NaZSM-5 zeolite due to the limitation of the channel size. These results suggest that the dispersion only occurs under the condition that the diameter of the inorganic salts is less or similar to the pore size of the zeolites. Also, we observed that the dispersion capacity of the inorganic salts is strongly related to the pore size of the zeolites. Furthermore, the isotherms for probing molecules show that the dispersion of inorganic salts into zeolites leads to significant change in the pore size of zeolites. The MoO3/NaY samples exhibit that the pore size was selectively formed at 6.8–8.0, 6.0–6.8, 4.3–6.0, and 3.0–4.3 Å with MoO3loading at 0.08, 0.16, 0.21, and 0.24 g/g, respectively. Therefore, it is proposed that we could modify the pore sizes of zeolites to various degrees, which may be very useful to design suitable pores of zeolites for the catalysts in catalytic reactions. Catalytic data in selective reduction of NO by propylene at the temperature of 300°C show that CuCl2/HZSM-5 catalyst prepared from the dispersion method exhibits much higher catalytic conversion (39%: N2yield) than that (21%: N2yield) of CuZSM-5 catalyst prepared from the ion-exchange method.

Pore size control of NaY zeolite by chemical liquid deposition and shape-selective separation

Fine control of zeolite pore size by chemical liquid deposition

Zeolite pore size engineering by chemical liquid deposition

Chemical Liquid Deposition Zeolites With Controlled Pore-Opening Size And Shape-Selective Separation Of Isomers

Rapid Synthesis of Small Zeolite Y Crystals in the Absence of Seed Gel

Continuous Synthesis of Mesoporous Y Zeolites from Normal Inorganic Aluminosilicates and Their High Adsorption Capacity for Dibenzothiophene (DBT) and 4,6-Dimethyldibenzothiophene (4,6-DMDBT)

Fine Control of Zeolite Pore-opening Size and Gas Separation

Studies on the Control of the Pore-opening Size of HM Zeolite and Its Para-selectivity

Boosting Kinetic Separation of Ethylene and Ethane on Microporous Materials Via Crystal Size Control

Control of crystallization rate and morphology of zeolite silicalite-1 in solvent-free synthesis

Influence of Zeolite Crystal Size on Selective Conversion of N-Alkane: Controlling Intermediates' Diffusion Distances Inside the Micropores

Preparation of Aluminosilicate Ferrierite Zeolite Nanosheets with Controllable Thickness in the Presence of a Sole Organic Structure Directing Agent

A high‐resolution solid‐state NMR study on nano‐structured HZSM‐5 zeolite

Pore Structure and Catalytic Behavior of Modified Y Zeolites

Liquid-phase xylene isomerization on nano-sized ZSM-5

Influence of the surfactant on structural characterizations and molecular adsorption properties of surfactant-templated NaY zeolite

Synthesis of nanosized IM-5 zeolite and its CH4/N2 adsorption and separation

Rapid and Facile Synthesis of Nanosized Silicalite-1 Zeolites from Solid Silica in a Semisolid-like System Via a Two-Step Crystallization Method

Glycerol Molecules in Nano Channels of NaY and USY Zeolites

Dispersion of Inorganic Salts into Zeolites and Their Pore Modification

Synthesis of NaY Zeolite and their CO<sub>2</sub> Adsorption Properties