Abstract:Stirling-type pulse tube cryocoolers (SPTCs) working at liquid-helium temperatures are attractive in space applications because they have advantages of high reliability, compactness, etc. However, the refrigeration efficiency is as low as 0.5% of Carnot efficiency or less. A method of increasing the cross-sectional area of the regenerator at the colder part is proposed in this paper, so as to reduce the heat-associated enthalpy flow at the cold end and improve the performance of the regenerative refrigerators at liquid-helium temperatures, and it is verified through experiments for the first time. Two kinds of variable cross-sectional structures are used in the experiments, which both increase the volume of the regenerator at the colder part. The no-load temperature of the refrigerator reaches 3.87 K, which is about 0.14 K lower than that of the refrigerator with a uniform cross-sectional regenerator under the same working conditions, and the coefficient of performance (COP) is increased by 66% at 4.2 K, and the precooling temperature is 16 K in this case. Theoretical analyses show that there are several reasons for reducing the heat-associated enthalpy flow at the cold end, including: (1). increase of the heat transfer area between the working fluid and the matrix; (2). increase of the total heat capacity of the matrix at the cold end. It is found that the lower the refrigeration temperature, the more serious the real gas effect, resulting in a more significant improvement. However, the increase in the cross-sectional area causes some side effects of reducing both the impedance of the regenerator and the flow rate of the working gas, resulting in a lower heat transfer coefficient. A smaller benefit is got as the refrigeration temperature rises, and the improvement of the COP tends to vanish at about 6 K. It is also found that the performance improvement is more significant when the regenerative efficiency is lower. This new method should provide a reference for further improving the performance of the regenerative refrigerator at liquid-helium temperatures.

Analysis of hydrogenation of regenerative material Er3Ni and its reaction product

Hydrogenation-induced variation in crystal structure and heat capacity of magnetic regenerative material Er3Ni

Hydrogenation Induced Change in Structures, Magnetic Properties and Specific Heats of Magnetic Regenerative Material Erni and Erni2

Refrigeration performance enhancement of pulse tube refrigerators with He–H2 mixtures and Er3NiHx regenerative material

Hydrogen absorption characteristics and structural transformation during the hydrogenation process of Er3Ni

Study on Reaction Characteristics of Er3ni Hydrogenation

Investigation Of Helium And Nitrogen Mixtures In A Pulse Tube Refrigerator

Performance analysis of a micro-scale pulse tube cryocooler based on optical fiber regenerator

He-H2 Mixture and Er3NiHx Packing for the Refrigeration Enhancement of Pulse Tube Refrigerator

Hydrogenation Reaction Characteristics and Properties of Its Hydrides for Magnetic Regenerative Material HoCu 2

Packing for the Refrigeration Enhancement of Pulse Tube Refrigerator

Effect of Rare Earth Doping on the Hydrogen Storage Performance of Ti1.02Cr1.1Mn0.3Fe0.6 Alloy for Hybrid Hydrogen Storage Application

Investigation On The Regenerator Performance Using Gas Mixtures

An Experimental Investigation on Pulse Tube Refrigeration with Mixture Fluids

Discussion On Regenerator Performance Improvement With Binary Gas Mixture

Hydrogen Storage Properties and Crystal Structure of Ti-Cr Based Alloys

Varying the Cross-Sectional Area of the Regenerator for Improving the Refrigeration Efficiency at Liquid-Helium Temperatures

Study On Pulse Tube Refrigeration Performance With Two-Component Gas Mixture

Experimental Study On Pulse Tube Refrigeration With Helium And Nitrogen Mixtures

Hydrogen induced structural and magnetic transformations in magnetic regenerator materials ErNin (n=1, 2) and HoCu2

Low-cost Vanadium-Free Ti–Zr–Cr–Mn–Fe Based Alloys for Metal Hydride Hydrogen Compressor under Mild Conditions