Abstract:Electrochemically stable phosphates promise high reversible capacity, high operating voltage, and good ion mobility and have the potential to provide electrochemically superior, environmentally friendly (Co-free) and affordable battery materials. Li 3 V (2−2x/3) Mg x (PO 4 ) 3 /C (x=0, 0.15, 0.3, and 0.45) composite phosphate cathode materials show high reversible capacity, high operating voltage and good cycling stability. In order to understand the functioning of this cathode at the molecular level, we have determined the local vanadium structure as a function of charge state using in-situ x-ray absorption spectroscopy (XAS). The XAS results verify for the charge compensation involves V cycling between V 3+ and V 5+ during charge and discharge and shows that these changes in oxidation/reduction are accompanied by modest changes in V-O bond length but little apparent change the overall local structure of the V and its neighboring atoms. In contrast, there is a significant change in local structure if the cut-off potential is increased from 4.5V to 4.8 V. Once the electrode has been charged to 4.8V it undergoes an irreversible conversion to a vanadyl-like structure. While the vanadium is still redox active, it is not converted back to the starting form, even at potentials as low as 2.0 V cut off region. Although the details of the behavior depend on the level of Mg doping, similar results are found for all samples. These data provide for the first time a molecular level explanation for the observation that vanadium phosphate batteries suffer irreversible capacity loss if charges above 4.5 V.

Synthesis and characterization of Li3V(2−2x/3)Mgx(PO4)3/C cathode material for lithium-ion batteries

Synthesis and performance of Li3(V1-xMgx)2(PO4)3 cathode materials

Electrochemical Performance of Li3V2-xMnx(PO4)(3)/C Cathode Materials Prepared by a Sol-Gel Method

Synthesis and Electrochemical Performance of 0.6li3v2(po4)3·0.4li–v–o Composite Cathode Material for Lithium Ion Batteries

Synthesis and electrochemical performances of Li3V2(PO4)3/(Ag + C) composite cathode

Carbon-coated Li3V2(PO4)(3) Composite Cathode Material for Lithium-Ion Batteries: Sol-gel Synthesis and Performance

Electrochemical Performance of Nanocrystalline Li3V2(PO4)3/carbon Composite Material Synthesized by a Novel Sol–gel Method

Electrochemical and Local Structural Analysis of the Li3V(2-2x/3)Mgx(PO4)3/C (x=0, 0.15, 0.3, and 0.45) Cathode

Composites of LiMnPO4 with Li3V2(PO4)3 for Cathode in Lithium-Ion Battery

High Performance Li3V2(PO4)3/C Composite Cathode Material for Lithium Ion Batteries Studied in Pilot Scale Test

Mesoporous Li3v2(Po4)(3)@Cmk-3 Nanocomposite Cathode Material for Lithium Ion Batteries

Electrochemical performance of the carbon coated Li3V2(PO4)3 cathode material synthesized by a sol–gel method

Synthesis and electrochemical performance of lithium vanadium phosphate and lithium vanadium oxide composite cathode material for lithium ion batteries

Nanostructured Li 3 V 2 (PO 4 ) 3 /C Composite As High-Rate and Long-Life Cathode Material for Lithium Ion Batteries

Off-stoichiometric Li3-3xV2+x(PO4)3/C As Cathode Materials for High-Performance Lithium-Ion Batteries

Synthesis and Characterization of Carbon-Coated Li3V2(PO4)3 Cathode Materials with Different Carbon Sources

Electrochemical and Local Structural Analysis of the Li<sub>3</sub>V<sub>(2-2x/3)</sub>Mg<sub>x</sub>(PO<sub>4</sub>)<sub>3</sub>/C (x=0, 0.15, 0.3, and 0.45) Cathode

Li3v2(Po4)(3): Synthesis By Sol-Gel Method And Performance

Preparation of Li3V2 (po4)3/lifepo4 Composite Cathode Material for Lithium Ion Batteries

Li3v2(Po4)(3)/C Composite As an Intercalation-Type Anode Material for Lithium-Ion Batteries

Mg-doped LiMnPO4/C Cathode Materials for Enhanced Lithium Storage Performance