Abstract:A joint chemical reactor system referred to as an ultrasonic-intensified micro-impinging jetting reactor (UIJR), which possesses the feature of fast micro-mixing, was proposed and has been employed for rapid preparation of FePO4 particles that are amalgamated by nanoscale primary crystals. As one of the important precursors for the fabrication of lithium iron phosphate cathode, the properties of FePO4 nano particles significantly affect the performance of the lithium iron phosphate cathode. Thus, the effects of joint use of impinging stream and ultrasonic irradiation on the formation of mesoporous structure of FePO4 nano precursor particles and the electrochemical properties of amalgamated LiFePO4/C have been investigated. Additionally, the effects of the reactant concentration (C=0.5, 1.0 and 1.5molL−1), and volumetric flow rate (V=17.15, 51.44, and 85.74mLmin−1) on synthesis of FePO4·2H2O nucleus have been studied when the impinging jetting reactor (IJR) and UIJR are to operate in nonsubmerged mode. It was affirmed from the experiments that the FePO4 nano precursor particles prepared using UIJR have well-formed mesoporous structures with the primary crystal size of 44.6nm, an average pore size of 15.2nm, and a specific surface area of 134.54m2g−1 when the reactant concentration and volumetric flow rate are 1.0molL−1 and 85.74mLmin−1 respectively. The amalgamated LiFePO4/C composites can deliver good electrochemical performance with discharge capacities of 156.7mAhg−1 at 0.1C, and exhibit 138.0mAhg−1 after 100 cycles at 0.5C, which is 95.3% of the initial discharge capacity.

Preparation of Li3V2 (po4)3/lifepo4 Composite Cathode Material for Lithium Ion Batteries

Rapid Preparation of High Electrochemical Performance LiFePO4/C Composite Cathode Material with an Ultrasonic-Intensified Micro-Impinging Jetting Reactor

Electrochemical Performance of Nanocrystalline Li3V2(PO4)3/carbon Composite Material Synthesized by a Novel Sol–gel Method

Preparation of V-LiFePO 4 Cathode Material for Li-ion Batteries

Preparation and Characterization of Li3v2(Po4)(3) Grown on Carbon Nanofiber As Cathode Material for Lithium-Ion Batteries

Preparation of LiFePO4/Li3V2(PO4)3/C composite cathode materials and their electrochemical performance analysis

Enhanced electrochemical performance of LiVPO4F/C composite with in-situ generated Li3V2(PO4)3 for lithium-ion batteries

Novel synthesis of LiFePO4–Li3V2(PO4)3 composite cathode material by aqueous precipitation and lithiation

Synthesis and Electrochemical Performance of 0.6li3v2(po4)3·0.4li–v–o Composite Cathode Material for Lithium Ion Batteries

A Li3V2(PO4)3/C Thin Film with High Rate Capability As a Cathode Material for Lithium-Ion Batteries

Material Optimization Engineering toward xLiFePO4·yLi3V2(PO4)3 Composites in Application-Oriented Li-Ion Batteries

Improved Electrochemical Performances of 9lifepo4·li3v2(po4)/c Composite Prepared by a Simple Solid-State Method

Preparation of LiFePO<sub>4</sub>/C Cathode Materials via a Green Synthesis Route for Lithium-Ion Battery Applications

Preparation of LiFePO4/C Cathode Materials via a Green Synthesis Route for Lithium-Ion Battery Applications

Preparation and properties of LiFePO4/C composite materials with Fe2O3 as starting reactant

Li3v2(Po4)(3)/C Composite As an Intercalation-Type Anode Material for Lithium-Ion Batteries

Improved Electrochemical Performances of LiFePO4·Li3V2(PO4)/C Composite Cathode Materials Prepared by Two Simple Solid-State Methods

Preparation of LiFePO₄/C Cathode Materials via a Green Synthesis Route for Lithium-Ion Battery Applications

Preparation and Electrochemical Performance of 2life1–xcoxpo4–li3v2(po4)3/c Cathode Material for Lithium-Ion Batteries

Highly efficient synthesis of nano LiMn0.90Fe0.10PO4/C composite via mechanochemical activation assisted calcination

Structure Tracking Aided Design and Synthesis of Li3V2(PO4)3 Nanocrystals As High-Power Cathodes for Lithium Ion Batteries