Abstract:The LiMnxFe1-xPO4/C (x = 0.5, 0.6, and 0.7) cathode materials for lithium-ion batteries were synthesized by polyethylene glycol (PEG) 400 as the carbon source via a combination of wet ball-milling and high-temperature solid-state reaction. The analysis results of X-ray diffraction (XRD), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HRTEM) indicate that the as-prepared LiMn0.6Fe0.4PO4/C sample has a single-phase orthorhombic olivine structure, and the majority of particle sizes range from 100 to 200 nm with a ~2-3 nm carbon coating layer. The electrochemical measurements demonstrate that the obtained LiMn0.6Fe0.4PO4/C composite possesses preferable Li-ion storage properties, and the discharge capacity of 137.7 mAh g-1 at 1 C rate, which is 83.6% of that at 0.1 C rate. The composite also exhibits outstanding cycling stability, with a capacity retention of 98.2% after 100 cycles at 0.2 C rate. And the differential capacity analysis (dQ/dV) reveals that the dominating degradation of LiMn0.6Fe0.4PO4/C is caused by the Mn2+ /Mn3+ redox capacity loss which is located at ~4.12/3.96V, whether during the charge or discharge process. Moreover, the LiMn0.6Fe0.4PO4/C sample delivers excellent high-temperature performances (45 °C), with improved reversible capacity and capacity retention of 148.7 mAh g-1 and 99.3% after 80 cycles at 0.5 C rate, respectively.

Preparation and Electrochemical Performance of 2life1–xcoxpo4–li3v2(po4)3/c Cathode Material for Lithium-Ion Batteries

Electrochemical Performance of LiFe1−xVxPO4/carbon Composites Prepared by Solid-State Reaction

Preparation and Electrochemical Properties of Carbon-Coated LiMn0.6Fe0.4PO4 Cathode Material for Lithium-Ion Batteries

Synthesis and electrochemical characterization of LiFePO4/C Cathode materials for Li-ion batteries

A Novel Synthesis and Characterization of LiFePO4 and LiFePO4/C As a Cathode Material for Lithium-Ion Battery

Preparation and properties of LiFePO4/C composite materials with Fe2O3 as starting reactant

Novel synthesis of LiFePO4–Li3V2(PO4)3 composite cathode material by aqueous precipitation and lithiation

Li<sub>0.99</sub>Ti<sub>0.01</sub>FePO<sub>4</sub>/C composite as cathode material for lithium ion battery

Preparation of Li3V2 (po4)3/lifepo4 Composite Cathode Material for Lithium Ion Batteries

Li 0.99 Ti 0.01 FePO 4 /C composite as cathode material for lithium ion battery

Synthesis and Electrochemical Performance of 0.6li3v2(po4)3·0.4li–v–o Composite Cathode Material for Lithium Ion Batteries

Improved Electrochemical Performances of LiFePO4·Li3V2(PO4)/C Composite Cathode Materials Prepared by Two Simple Solid-State Methods

Carbon-coated Li3V2(PO4)(3) Composite Cathode Material for Lithium-Ion Batteries: Sol-gel Synthesis and Performance

Synthesis of LiFePO4/C Composite As a Cathode Material for Lithium-Ion Battery by a Novel Two-Step Method

Off-stoichiometric Li3-3xV2+x(PO4)3/C As Cathode Materials for High-Performance Lithium-Ion Batteries

Synthesis Mechanism and Characterization of LiMn 0.5 Fe 0.5 PO 4 /C Composite Cathode Material for Lithium -Ion Batteries

Based on first-principles calculation, study on the synthesis, and performance of Fe–Ni co-doped LiMnPO4/C as cathode material for lithium-ion batteries

Physical and Electrochemical Properties of Li<sub>2-x</sub>FeSiO<sub>4</sub>/C Cathode Material for Li-Ion Batteries

The Synthesis of LiMnxFe1−xPO4/C Cathode Material through Solvothermal Jointed with Solid-State Reaction

Synthesis mechanism and characterization of LiMn0.5Fe0.5PO4/C composite cathode material for lithium-ion batteries

The Synthesis of LiMn x Fe 1-x PO₄/C Cathode Material through Solvothermal Jointed with Solid-State Reaction.