Abstract:The LiMnxFe1-xPO4/C (x = 0.5, 0.6, and 0.7) cathode materials for lithium-ion batteries were synthesized by polyethylene glycol (PEG) 400 as the carbon source via a combination of wet ball-milling and high-temperature solid-state reaction. The analysis results of X-ray diffraction (XRD), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HRTEM) indicate that the as-prepared LiMn0.6Fe0.4PO4/C sample has a single-phase orthorhombic olivine structure, and the majority of particle sizes range from 100 to 200 nm with a ~2-3 nm carbon coating layer. The electrochemical measurements demonstrate that the obtained LiMn0.6Fe0.4PO4/C composite possesses preferable Li-ion storage properties, and the discharge capacity of 137.7 mAh g-1 at 1 C rate, which is 83.6% of that at 0.1 C rate. The composite also exhibits outstanding cycling stability, with a capacity retention of 98.2% after 100 cycles at 0.2 C rate. And the differential capacity analysis (dQ/dV) reveals that the dominating degradation of LiMn0.6Fe0.4PO4/C is caused by the Mn2+ /Mn3+ redox capacity loss which is located at ~4.12/3.96V, whether during the charge or discharge process. Moreover, the LiMn0.6Fe0.4PO4/C sample delivers excellent high-temperature performances (45 °C), with improved reversible capacity and capacity retention of 148.7 mAh g-1 and 99.3% after 80 cycles at 0.5 C rate, respectively.

Composites of LiMnPO4 with Li3V2(PO4)3 for Cathode in Lithium-Ion Battery

High-performance Carbon-Coated LiMnPO4 Nanocomposites by Facile Two-Step Solid-State Synthesis for Lithium-Ion Battery

Ascorbic Acid-Assisted Solvothermal Synthesis of LiMn 0.9 Fe 0.1 PO 4 /C Nanoplatelets with Enhanced Electrochemical Performance for Lithium Ion Batteries

Heterogeneous Synthesis and Electrochemical Performance of LiMnPO4/C Composites As Cathode Materials of Lithium Ion Batteries

LiMnPO4·Li3V2(PO4)3 Composite Cathode Material Derived from Mn(VO3)2 Nanosheet Precursor

High-performance, nanostructure LiMnPO 4 /C composites synthesized via one-step solid state reaction

Hydrothermal Synthesis of LiMn0.79Fe0.2Mg0.01PO4/C Composite Cathode Materials Using Different Li3PO4 Precursors

Enhanced electrochemical performance of LiVPO4F/C composite with in-situ generated Li3V2(PO4)3 for lithium-ion batteries

Synthesis and electrochemical performance of lithium vanadium phosphate and lithium vanadium oxide composite cathode material for lithium ion batteries

Synthesis and Electrochemical Performance of 0.6li3v2(po4)3·0.4li–v–o Composite Cathode Material for Lithium Ion Batteries

Enhancing electrochemical performance of Mn doped LiFePO4 cathode materials for lithium-ion batteries

Hierarchical LiFe0.98MII 0.02PO4/C (MII = Ni, Mn, Mg) Composites Via Co-Doping for Lithium Ion Batteries

Preparation and Electrochemical Properties of Carbon-Coated LiMn0.6Fe0.4PO4 Cathode Material for Lithium-Ion Batteries

Synthesis Mechanism and Characterization of LiMn 0.5 Fe 0.5 PO 4 /C Composite Cathode Material for Lithium -Ion Batteries

Preparation and Electrochemical Properties of X Li2MnO3·(1-x)LiMn2O4 Composites

Synthesis and characterization of Li3V(2−2x/3)Mgx(PO4)3/C cathode material for lithium-ion batteries

Synthesis mechanism and characterization of LiMn0.5Fe0.5PO4/C composite cathode material for lithium-ion batteries

Sol-Gel Synthesis and Electrochemical Performance of LiMnPO_4/C Cathode Material

Based on first-principles calculation, study on the synthesis, and performance of Fe–Ni co-doped LiMnPO4/C as cathode material for lithium-ion batteries

A Nanocomposite of Li2mno3 Coated by Fepo4 As Cathode Material for Lithium Ion Batteries

Highly efficient synthesis of nano LiMn0.90Fe0.10PO4/C composite via mechanochemical activation assisted calcination