Abstract:Unraveling the microstructural heterogeneity is an important issue to understand the physical and mechanical properties of metallic glasses. Structural relaxation below the glass transition temperature Tg and cold rolling at ambient temperature are effective ways to tune the state within the potential energy landscape of metallic glasses, modifying the microstructural heterogeneity. With the help of nanoindentation technique, by scrutinizing the local reduced modulus and hardness of a typical Zr50Cu40Al10 metallic glasses in different energy states (from structural relaxed state to rejuvenated state), we demonstrate that the enhancement of microstructural heterogeneity plays an important role in tailoring the mechanical behavior. The internal friction coefficient is obtained by fitting the experimental load-displacement curves with finite element simulation. It is found that internal friction coefficient decreases with the increase of concentration of flow defects. The stress exponent obtained from the creep stage shows a strong dependence on the structural state of metallic glasses. Effects of structural relaxation and rejuvenation on the structural state are rationalized in terms of the relative flow defects concentration. Finally, the statistics of discrete displacement bursts during the deformation process were probed. We find that the displacement bursts behavior is sensitive to the structural energy state (microstructural heterogeneity). The displacement bursts phenomenon changes from obvious (relaxed state) to unapparent behaviors (rejuvenated state). By given a physical schematic, the correlation between the displacement bursts size and the shear band size in the local plastic zones is well established, which will lead to a deeper understanding of the rejuvenation-induced plasticity of metallic glasses.

Enhancement of Plasticity and Toughness in Monolithic Zr-based Bulk Metallic Glass by Heterogeneous Microstructure

Ultrasonic excitation induced nanocrystallization and toughening of Zr<sub>46.75</sub>Cu<sub>46.75</sub>Al<sub>6.5</sub> bulk metallic glass

Relating melting temperature with structure heterogeneity and plasticity of Zr57Cu20Al10Ni8Ag5 bulk metallic glass

Enhanced Plasticity in a Zr-based Bulk Metallic Glass Containing Nanocrystalline Precipitates

Enhanced Plasticity by Introducing Icosahedral Medium-Range Order in Zrcunial Metallic Glass

Unraveling the microstructural heterogeneity and plasticity of Zr<sub>50</sub>Cu<sub>40</sub>Al<sub>10</sub> bulk metallic glass by nanoindentation

Structural Heterogeneity Originated Plasticity in Zr–Cu–Al Bulk Metallic Glasses

Enhancement of Plasticity in Zr-based Bulk Metallic Glasses

Tensile Plasticity in Monolithic Bulk Metallic Glass with Sandwiched Structure

High Tensile Plasticity and Strength of a CuZr-based Bulk Metallic Glass Composite

Enhanced Plasticity of a Zr50Cu48Al2 Bulk Metallic Glass

Toughening mechanism of Zr-based and Cu-based bulk metallic glasses composites by TiNb particle

Enhanced Plasticity by Phase Separation in CuZrAl Bulk Metallic Glass with Micro-Addition of Fe

Plasticity-improved Zr–Cu–Al Bulk Metallic Glass Matrix Composites Containing Martensite Phase

Formation of Cu–Zr–Al Bulk Metallic Glass Composites with Improved Tensile Properties

A Plastic Zr–Cu–Ag–Al Bulk Metallic Glass

Homogeneity of the Superplastic Zr64.13Cu15.75Ni10.12Al10 Bulk Metallic Glass

Free-volume-induced Enhancement of Plasticity in a Monolithic Bulk Metallic Glass at Room Temperature

Microstructural Tailoring and Improvement of Mechanical Properties in CuZr-based Bulk Metallic Glass Composites

Pronounced Ductility in CuZrAl Ternary Bulk Metallic Glass Composites with Optimized Microstructure Through Melt Adjustment

Composition design of plastic Cu–Zr–Ti–Ni bulk metallic glass: A liquidus perspective