Abstract:The effect of composition tuning on glass forming ability (GFA), mechanical properties and atomic structure in ZrxCo84−xAl16 bulk metallic glasses (BMGs) with x = 51–58 has been investigated by using copper-mold suction casting, nanoindentation, high-energy X-ray diffraction, extended X-ray absorption fine structure experiments and ab initio molecular dynamics simulations, respectively. It is found that GFA firstly increases then decreases with increasing Zr content, exhibiting a maximum diameter of 7 mm with the Zr content of 55 and 56, while an abrupt reduction of bending plasticity occurs as the Zr content drops below 55. Both experimental and theoretical results find that GFA is remarkably enhanced, due to the abnormal reduction in the fractions of the Co-centered ⟨0, 2, 8, 1⟩, ⟨0, 3, 6, 2⟩ and ⟨0, 3, 6, 3⟩ polyhedra, and the denser atomic packing of Zr atoms around center Co atom, as the Zr content increases from 51 to 56. Meanwhile, the simultaneously improved plasticity is associated with the increased Co-centered ⟨0, 3, 6, 0⟩, and Al-centered ⟨0, 2, 8, 1⟩ and ⟨0, 3, 6, 2⟩ polyhedra, which provide more fertile sites for the nucleation of shear transformations. Further Zr addition to 58 increases remarkably the fractions of Zr- and Al-centered ⟨0, 1, 10, 2⟩ and ⟨0, 3, 6, 4⟩ polyhedra, and causes looser atomic packing of Co atoms around center Zr atom, leading to the reduction in GFA. However, the plasticity is not enhanced further but remains nearly constant, which may be related to the deteriorated effect on plasticity of the decreased fractions of Zr-centered ⟨0, 1, 10, 5⟩ and Co-centered ⟨0, 3, 6, 0⟩ polyhedra, and the increased fractions of Zr-centered ⟨0, 1, 10, 3⟩ and ⟨0, 2, 8, 4⟩ and Co-centered ⟨0, 2, 8, 0⟩ polyhedra. Compositional tuning, with internal structure tuned to favor both GFA and plastic flow, offers new possibilities in developing ductile BMG materials.

Homogeneity of the Superplastic Zr64.13Cu15.75Ni10.12Al10 Bulk Metallic Glass

Atomic-scale Heterogeneity in Large-Plasticity Cu-doped Metallic Glasses

A Plastic Zr–Cu–Ag–Al Bulk Metallic Glass

Plasticity and microstructure of Zr–Cu–Al bulk metallic glasses

Heterogeneities in CuZr-based bulk metallic glasses studied by x-ray scattering

Enhanced Plasticity in a Zr-based Bulk Metallic Glass Containing Nanocrystalline Precipitates

Plasticity-improved Zr–Cu–Al Bulk Metallic Glass Matrix Composites Containing Martensite Phase

Unusual Solidification Behavior of a Zr–Cu–Ni–Al Bulk Glassy Alloy Made from Low-Purity Zr

Enhancement of Plasticity in Zr-based Bulk Metallic Glasses

Formation, Thermal Stability and Mechanical Properties of Zr-Nb-Cu-Ni-Al Bulk Metallic Glasses

Structural Heterogeneity, Ductility, and Glass Forming Ability of Zr-Based Metallic Glasses

Mechanical Properties of Monolithic Zr62Al8Ni13Cu17 Bulk Metallic Glass

New Class of Plastic Bulk Metallic Glass.

Deformation-induced microstructural heterogeneity and rejuvenation in a Zr-based bulk metallic glass

Enhanced Plasticity in Zr–Cu–Ag–Al–Be Bulk Metallic Glasses

Hierarchical micro-nanostructured Zr-based metallic glass with tensile plasticity

Improved Tensile Ductility by Severe Plastic Deformation for Nano-Structured Metallic Glass.

Homogeneous plastic deformation in a Cu-based bulk amorphous alloy

Superductile Bulk Metallic Glass

Enhanced mechanical properties of Zr65Cu15Ni10Al10 bulk metallic glass by simultaneously introducing surface grooves and multiple shear bands

Glass forming ability and bending plasticity evolutions in Zr-Co-Al bulk metallic glasses and their structural origin