Abstract:(Cu50Zr50)(x)(Cu73Ti27)(100-x) (x = 0.63-0.75 at.%) alloys are designed using the proportional mixing of Cu(50)Zr(50 )and Cu73Ti27 binary alloys. Their thermal, mechanical and corrosive properties as well as the glass forming ability (GFA) are systematically investigated. The results show that the studied Cu-based glass forming alloys are bulk metallic glass composites (BMGCs) with off-eutectic compositions and display work-hardening behavior. The glass transition temperature and the reduced glass transition temperature increase and then decrease with increasing x when x >= 0.74 atop, while on the contrary for the critical cooling rate and supercooled liquid region. Both yield strength and fracture strength firstly increase and then decrease with decreasing x when x <= 0.71 at%. The plastic strain of (Cu50Zr50)(0.)(75)(Cu73Ti27)(0.)(25) BMGC is the largest among the studied Cu-based BMGCs. Potentiodynamic polarization measurements show that all studied BMGCs exhibit a step-like anodic polarization behavior, indicating two competitive procedures of pitting corrosion and self-passivization. The corrosion behavior gradually transforms from predominant self-passivization to the pitting corrosion with decreasing x. Both corrosion current density and onset passive current density of (Cu50Zr50)(0.)(75)(Cu73Ti27)(0.)(25) BMGCs are two orders of magnitude lower than those of the other Cu-based BMGCs. The mechanisms for the GFA and the corrosion are also discussed. The present work would shed light on how to design and develop BMGCs with superior comprehensive performances.

Microstructural Tailoring and Improvement of Mechanical Properties in CuZr-based Bulk Metallic Glass Composites

Ultrasonic excitation induced nanocrystallization and toughening of Zr<sub>46.75</sub>Cu<sub>46.75</sub>Al<sub>6.5</sub> bulk metallic glass

Formation of Cu–Zr–Al Bulk Metallic Glass Composites with Improved Tensile Properties

The Effect of Microalloying on Mechanical Properties in CuZrAl Bulk Metallic Glass

Microstructure evolution and mechanical properties of Cu46Zr47Al7 bulk metallic glass composite containing CuZr crystallizing phases

A CuZr-based Bulk Metallic Glass Composite with Excellent Mechanical Properties by Optimizing Microstructure

Pronounced Ductility in CuZrAl Ternary Bulk Metallic Glass Composites with Optimized Microstructure Through Melt Adjustment

Crystallization Behavior and Mechanical Properties of Cu-based Bulk Metallic Glass Composites

Microstructural percolation assisted breakthrough of trade-off between strength and ductility in CuZr-based metallic glass composites

Microstructural heterogeneities governing the deformation of Cu47.5Zr47.5Al5 bulk metallic glass composites

Deformation-Induced Martensitic Transformation in Cu-Zr-Zn Bulk Metallic Glass Composites

Martensitic Transformation and Plastic Deformation of TiCuNiZr-Based Bulk Metallic Glass Composites

Bulk metallic glass composites ductilized by core–shell structured dual crystalline phases through controlled inoculation

Induced multiple heterogeneities and related plastic improvement by laser surface treatment in CuZr-based bulk metallic glass

Fabrication and Mechanical Properties of Cu‐Based Bulk Metallic Glass and Composites

Enhanced mechanical properties of Zr65Cu15Ni10Al10 bulk metallic glass by simultaneously introducing surface grooves and multiple shear bands

Optimizing mechanical and electrical properties of Cu-coated Cu–Zr–Al bulk metallic glass composites by adjusting glassy powder size

Composition Design and Properties of Cu–Zr–Ti Bulk Metallic Glass Composites

Enhancing strength and plasticity of Zr-based bulk metallic glasses by Zr partially substituted Fe and isothermal annealing

Controlling the Mechanical Properties of Bulk Metallic Glasses by Superficial Dealloyed Layer

High Tensile Plasticity and Strength of a CuZr-based Bulk Metallic Glass Composite