Abstract:This paper is intended to introduce an analysis method for thermo-gravimetric study of the rigid polyurethane foam(RPUF) of commercial grade in the atmospheric and nitrogen conditions.The samples we adopted should be heated from the ambient temperature to 800 ℃ at the heating rates of 10 ℃/min,20 ℃/min,40 ℃/min and 50 ℃/min,respectively.In the above said conditions,the RPUF to be tested has to undergo four decomposition stages as is required in the said conditions,whereas the first two stages were mainly supposed to experience the loss of water and small molecules,which are actually not essential for the dominant stages.However,the last two stages are supposed to be of great significance.With the increase of the heating rate,the temperature of the onset decomposition Ton,the temperature at the maximum decomposition rate Tm,and the maximum decomposition rate-(dwt/dt)m,are pushed to the high temperature region.Furthermore,the variations of activation energy with the conversion degree are evaluated by using Flynn-Wall-Ozawa(FWO) isoconversional method.In our study,we have also investigated the reaction model and corresponding kinetic parameters with the multivariate non-linear regression method.The kinetic parameters we have gained demonstrate that the decomposition of RPUF tends to undergo two successive reaction steps both under the atmospheric condition and nitrogen condition.The decomposition of RPUF can be described by Fn→Fn kinetic model under the atmospheric condition while that of RPUF under nitrogen condition can be described by Fn→D3 kinetic model.The kinetic model can further be verified by comparing the activation energy values obtained by FWO method and the multivariate non-linear regression method.Based on the analysis of the reliable kinetic parameters and the reaction models,the lifetime of RPUF under different temperatures can be predicted.It is also very sensitive to temperature variations and prone to the effects of other factors,for example,the decomposition atmosphere,etc.Thus,it can be seen that the present paper can provide useful experimental data for the improvement of classification of the burning behaviors and establishment of the system of the fire prevention codes of the exterior insulation.

Heat Resistance Testing Methods of Rigid Foam Plastics

Study of rigid cross-linked PVC foams with heat resistance

Experimental and Numerical Analyses of Thermal Failure of Rigid Polyurethane Foam

Thermal Mechanical Testing of Low Density Thermoplastic Foam

Heat Treatment Research of PVC/ Treated WF Composite Foaming Plastics

Thermal Stability Analysis of the Rigid Polyurethane Foam for the Exterior Insulation

Preparation and Properties of Rigid Cross-Linked Pvc Foam

Study on Crosslinked Rigid Polyvinyl Chloride Foam Plastic with Low Density

Compressive Mechanical Behavior and Corresponding Failure Mechanism of Polymethacrylimide Foam Induced by Thermo-Mechanical Coupling

Analysis of Heat-resistance Properties in Thermosetting Resins Measured by Different Method

Study of Failure Behaviors of Rigid Polyurethane Foam Treated under Thermal and Vibration Conditions by Experiment and Numerical Simulation

Closed-Cell Rigid Polyimide Foams for High-Temperature Applications: The Effect of Structure on Combined Properties

Multiscale investigation on molecular structure and mechanical properties of thermal‐treated rigid polyurethane foam under high temperature

Characterization and modeling of the uniaxial thermo-mechanical compressive behavior of polymethacrylimide (PMI) foam at different temperatures

Thermo-Mechanical Properties of Thermoplastic Polyimide Foams

Investigation on the failure behavior and compressive performance of rigid polyurethane foam treated under aerobic/anaerobic high temperature random vibration

Heat resistance of biobased materials, evaluation and effect of processing techniques and additives

An Experimental Study of Triaxial Compressive Dynamic Mechanical Properties of Foam Plastics

Study on dynamic mechanical properties and energy absorption of polymeric foams

Study on structure and properties of heat resistance polypropylene special resin

Study on Heat Resistance of PLA Based Biodegradable Injection Molded Components