Abstract:In this research, a new computational method was proposed for describing the mechanical behavior of super-elastic-plastic foams under inhomogeneous compressive impacts. The method regarded the foam material as composed of two typical mechanical properties superimposed multiple times: one was the hyper-elastic layer, and the other was the elastoplastic layer. The hyper-elastic layer and the elastoplastic layer were interwoven and overlapped, divided into double-layer, four-layer, and six-layer configurations to characterize the foam material. After the equivalent layering of the foam, by comparing the results of the four-layer and six-layer divisions, it was found that when the layering reached four layers, the foam performance curve had already converged. The study utilized the HYPERFOAM model and Mullins effect in the ABAQUS software to establish the constitutive relationship of the hyper-elastic layer. It adopted the Crushable foam model to develop the constitutive relationship of the elastoplastic layer. Under uniaxial compression conditions, quasi-static and intermediate strain rate compression tests were performed on polyethylene (PE) foam materials with three different densities. Based on the experimental results, the parameter values of the hyper-elastic-plastic foam model in the ABAQUS code were determined. By comparing the computational results and the experimental results, the established finite element (FE) model was validated using the mechanical behavior of indentation and compression tests. The results showed that this method could effectively describe the complex mechanical behavior and residual deformation of hyper-elastic-plastic foam packaging materials under non-uniform compression, and the experimental and simulation results agreed well, proving the reliability of this method.

An Experimental Study of Triaxial Compressive Dynamic Mechanical Properties of Foam Plastics

Mechanical Performance of Polystyrene Foam (EPS): Experimental and Numerical Analysis

A Study of Experimental Method for Mechanical Properties of Rigid Polyurethane Foam under Hydrostatic Compressive Loading

Impact Properties of Uniaxially Thermoformed Auxetic Foams

Experimental Study of the Dynamic and Static Compression Mechanical Properties of Closed-Cell PVC Foams

Topological Characteristics and Mechanical Properties of Uniaxially Thermoformed Auxetic Foam

Static and Dynamic Behavior of PU Foams with Multilayer Coatings

A New Method for the Dynamics Analysis of Super-Elastic-Plastic Foams under Inhomogeneous Loading and Unloading Conditions

Study of the Constitutive Relation of Low Density Plyethylene Foam under Compression

Compressive properties and energy absorption of rigid polyurethane foam

Influence of Strain Rate and Temperature on Compressive Properties and Energy Absorption Efficiency of Expanded Polystyrene and Flexible Polyurethane Foam

Characterization and modeling of the uniaxial thermo-mechanical compressive behavior of polymethacrylimide (PMI) foam at different temperatures

Experimental approach for characterizing the nonlinear, time and temperature‐dependent constitutive response of open‐cell polyurethane foams

[Influenza outbreaks in nursing homes].

Dynamic behavior of polyethylene terephthalate (PET) foam under compressive loads: Experimental and numerical study

Experimental Research on Dynamic Mechanical Properties of High-Density Foamed Concrete

High fidelity simulation of the mechanical behavior of closed-cell polyurethane foams

Mechanical Properties of Aluminium Foam and How Density, Temperature, and Strain Rate Affect Dynamic Strain–Stress Relationship

Research on Static Compression Test of Polyurethane Foam/Honeycomb Paperboard Composite Material

Experiments and parameter identification for the stress-strain relation of polyurethane foam

Experimental Analysis of the Mechanical Properties of Carbon Foams Under Quasi-Static Compressive Loads