Abstract:Polyurethane foam (PUF) is one of the most well-known cellular materials and is widely employed in various industrial and biomedical fields thanks to its many advantages. These include mechanical and material characteristics such as low density and thermal conductivity, and high specific elastic modulus and strength. Despite of these advantages, the PUF has extremely complex material nonlinearity, with changes in density and strain rate, which is a major obstacle to material design and the application of PUF-based structures. PUF has elasto-viscoplastic behavior including three stages of material features, linear elasticity, softening/plateau with stress drop and densification. These phenomena depend strongly on strain rate and density. Therefore, in this study, a phenomenological constitutive model, namely, an elasto-viscoplastic model, was proposed to describe the density- and strain rate-dependent material nonlinear behavior of PUF. The yield surface-independent plastic multiplier, and the hardening- and softening-associated internal state variables proposed by Frank and Brockman, and Zairi et al. were adopted in the constitutive model, respectively. The proposed constitutive model was discretized using the implicit time integration algorithm and was implemented into a user-defined subroutine of the commercial finite element analysis program, ABAQUS. At the same time, a deterministic identification method for material parameters of the constitutive model was introduced to predict the precise material response of PUF under arbitrary densities and strain rates. To do this, the three-dimensional constitutive model was contracted to a one-dimensional equation, and the explicit equation for each material parameter was derived. Then, the strain hardening- and softeningdependent material parameters were calculated using experimental results, such as the work hardening ratestress curve and the yield stress-strain rate curve. After analyzing the obtained material parameters, it was found that the material parameters were strongly dependent on the density and the strain rate. Consequently, the macroscopic material response of PUF, such as a uniaxial compressive stress-strain curve, can be predicted based on the proposed method in this study.

Study of the Constitutive Relation of Low Density Plyethylene Foam under Compression

Mechanical Performance of Polystyrene Foam (EPS): Experimental and Numerical Analysis

Impact Properties of Uniaxially Thermoformed Auxetic Foams

Investigation on the Compressive Mechanical Properties of Ultra-Thick CFRP Laminates

Research on the impact on the structural property by rigidization of the inflatable boom

A New Method for the Dynamics Analysis of Super-Elastic-Plastic Foams under Inhomogeneous Loading and Unloading Conditions

A Study of Experimental Method for Mechanical Properties of Rigid Polyurethane Foam under Hydrostatic Compressive Loading

Study on the Properties of Cushioning Package Material Made of Corn Straw and EPS

Experimental Study of the Dynamic and Static Compression Mechanical Properties of Closed-Cell PVC Foams

Compressive Properties and Constitutive Model of Semicrystalline Polyethylene.

Dynamic strain rate and relative density effect on compression behavior of PP and PP/PE copolymers foamed by microcellular injection molding

Establishment of buffer dynamic model for polyethylene foam cushion

A phenomenological constitutive modelling of polyethylene foam under multiple impact conditions

Dynamic behavior of polyethylene terephthalate (PET) foam under compressive loads: Experimental and numerical study

Parameter Determination and Model Modification of Sherwood-Frost Constitutive Model

Influence of Strain Rate and Temperature on Compressive Properties and Energy Absorption Efficiency of Expanded Polystyrene and Flexible Polyurethane Foam

Investigation of Density- and Strain Rate-dependent Strain Hardening-softening-coupled material Behavior of Polyurethane Foams using Elasto-viscoplastic Constitutive Model

A One-Dimensional Dynamic Constitutive Modeling of Ethylene Vinyl Acetate (EVA) Foam

Constitutive model with fractional derivatives for polyurethane foams under uniaxial compression

Mechanical Properties and Constitutive Model Applied to the High-Speed Impact of Aluminum Foam That Considers Its Meso-Structural Parameters.

The Constitutive Modeling of Double-B Flute Corrugated Board