Abstract:Polyurethane foam (PUF) is one of the most well-known cellular materials and is widely employed in various industrial and biomedical fields thanks to its many advantages. These include mechanical and material characteristics such as low density and thermal conductivity, and high specific elastic modulus and strength. Despite of these advantages, the PUF has extremely complex material nonlinearity, with changes in density and strain rate, which is a major obstacle to material design and the application of PUF-based structures. PUF has elasto-viscoplastic behavior including three stages of material features, linear elasticity, softening/plateau with stress drop and densification. These phenomena depend strongly on strain rate and density. Therefore, in this study, a phenomenological constitutive model, namely, an elasto-viscoplastic model, was proposed to describe the density- and strain rate-dependent material nonlinear behavior of PUF. The yield surface-independent plastic multiplier, and the hardening- and softening-associated internal state variables proposed by Frank and Brockman, and Zairi et al. were adopted in the constitutive model, respectively. The proposed constitutive model was discretized using the implicit time integration algorithm and was implemented into a user-defined subroutine of the commercial finite element analysis program, ABAQUS. At the same time, a deterministic identification method for material parameters of the constitutive model was introduced to predict the precise material response of PUF under arbitrary densities and strain rates. To do this, the three-dimensional constitutive model was contracted to a one-dimensional equation, and the explicit equation for each material parameter was derived. Then, the strain hardening- and softeningdependent material parameters were calculated using experimental results, such as the work hardening ratestress curve and the yield stress-strain rate curve. After analyzing the obtained material parameters, it was found that the material parameters were strongly dependent on the density and the strain rate. Consequently, the macroscopic material response of PUF, such as a uniaxial compressive stress-strain curve, can be predicted based on the proposed method in this study.

Constitutive model with fractional derivatives for polyurethane foams under uniaxial compression

Experiments and parameter identification for the stress-strain relation of polyurethane foam

Mechanical Performance of Polystyrene Foam (EPS): Experimental and Numerical Analysis

Stiffness, Energy Dissipation, and Hyperelasticity in Hierarchical Multilayer Composite Nanocoated Open‐Cell Polyurethane Foams

Investigation of Density- and Strain Rate-dependent Strain Hardening-softening-coupled material Behavior of Polyurethane Foams using Elasto-viscoplastic Constitutive Model

Static and Dynamic Behavior of PU Foams with Multilayer Coatings

A fractional model with parallel fractional Maxwell elements for amorphous thermoplastics

Mechanical Behaviors of Copolymer Elastomers: Experimental Characterization and Constitutive Modelling

Measurement and identification of dynamic properties of flexible polyurethane foam

A phenomenological constitutive modelling of polyethylene foam under multiple impact conditions

Experimental approach for characterizing the nonlinear, time and temperature‐dependent constitutive response of open‐cell polyurethane foams

A Constitutive Model for Transversely Isotropic Foams, and Its Application to the Indentation of Balsa Wood

A New Method for the Dynamics Analysis of Super-Elastic-Plastic Foams under Inhomogeneous Loading and Unloading Conditions

A sophisticated periodic micro-model for closed-cell foam based on centroidal constraint and capacity constraint

STUDY ON A MODELING METHOD OF THE DYNAMIC CHARACTERISTICS WITH MULTI-HYSTERESIS LOOPS OF POLYMER SEAT CUSHIONS

A Study of Experimental Method for Mechanical Properties of Rigid Polyurethane Foam under Hydrostatic Compressive Loading

High fidelity simulation of the mechanical behavior of closed-cell polyurethane foams

Establishment of Constitutive Model of Silicone Rubber Foams Based on Statistical Theory of Rubber Elasticity

Study of the Constitutive Relation of Low Density Plyethylene Foam under Compression

Compressive properties and energy absorption of rigid polyurethane foam

Construction of 3-D Realistic Representative Volume Element Failure Prediction Model of High Density Rigid Polyurethane Foam Treated under Complex Thermal-Vibration Conditions