Abstract:Polyurethane foam (PUF) is one of the most well-known cellular materials and is widely employed in various industrial and biomedical fields thanks to its many advantages. These include mechanical and material characteristics such as low density and thermal conductivity, and high specific elastic modulus and strength. Despite of these advantages, the PUF has extremely complex material nonlinearity, with changes in density and strain rate, which is a major obstacle to material design and the application of PUF-based structures. PUF has elasto-viscoplastic behavior including three stages of material features, linear elasticity, softening/plateau with stress drop and densification. These phenomena depend strongly on strain rate and density. Therefore, in this study, a phenomenological constitutive model, namely, an elasto-viscoplastic model, was proposed to describe the density- and strain rate-dependent material nonlinear behavior of PUF. The yield surface-independent plastic multiplier, and the hardening- and softening-associated internal state variables proposed by Frank and Brockman, and Zairi et al. were adopted in the constitutive model, respectively. The proposed constitutive model was discretized using the implicit time integration algorithm and was implemented into a user-defined subroutine of the commercial finite element analysis program, ABAQUS. At the same time, a deterministic identification method for material parameters of the constitutive model was introduced to predict the precise material response of PUF under arbitrary densities and strain rates. To do this, the three-dimensional constitutive model was contracted to a one-dimensional equation, and the explicit equation for each material parameter was derived. Then, the strain hardening- and softeningdependent material parameters were calculated using experimental results, such as the work hardening ratestress curve and the yield stress-strain rate curve. After analyzing the obtained material parameters, it was found that the material parameters were strongly dependent on the density and the strain rate. Consequently, the macroscopic material response of PUF, such as a uniaxial compressive stress-strain curve, can be predicted based on the proposed method in this study.

Construction of 3-D Realistic Representative Volume Element Failure Prediction Model of High Density Rigid Polyurethane Foam Treated under Complex Thermal-Vibration Conditions

Study of Failure Behaviors of Rigid Polyurethane Foam Treated under Thermal and Vibration Conditions by Experiment and Numerical Simulation

Failure mechanism of rigid polyurethane foam under high temperature vibration condition by experimental and finite element method

Experimental and Numerical Analyses of Thermal Failure of Rigid Polyurethane Foam

Investigation on the failure behavior and compressive performance of rigid polyurethane foam treated under aerobic/anaerobic high temperature random vibration

A sophisticated periodic micro-model for closed-cell foam based on centroidal constraint and capacity constraint

Investigation of Density- and Strain Rate-dependent Strain Hardening-softening-coupled material Behavior of Polyurethane Foams using Elasto-viscoplastic Constitutive Model

Mechanical Performance of Polystyrene Foam (EPS): Experimental and Numerical Analysis

Innovation in lifetime prediction of rigid polyurethane foam through random vibration and comparison with conventional methods

Multiscale investigation on molecular structure and mechanical properties of thermal‐treated rigid polyurethane foam under high temperature

Investigation On Compression Mechanical Properties Of Rigid Polyurethane Foam Treated Under Random Vibration Condition: An Experimental And Numerical Simulation Study

Compressive properties and energy absorption of rigid polyurethane foam

Prediction of Aging Performance of Particle-Filled Polymer Composites Based on RVE Model

Thermal-vibration aging of fiber-reinforced polymer cylindrical shells with polyurea coating: Theoretical and experimental studies

High fidelity simulation of the mechanical behavior of closed-cell polyurethane foams

Assessment of Multiaxial Mechanical Response of Rigid Polyurethane Foams

Free Volume Based Nonlinear Viscoelastic Model for Polyurea over a Wide Range of Strain Rates and Temperatures

Strength Analysis of Syntactic Foams Using a Three-Dimensional Continuum Damage Finite Element Model

Characterization and modeling of the uniaxial thermo-mechanical compressive behavior of polymethacrylimide (PMI) foam at different temperatures

Micromechanical modeling for longitudinal tensile property of unidirectional CFRP considering dispersion of fiber properties

FEM based RVE modeling for estimating axial modulus of polyurethane composite reinforced with MXene