Abstract:This paper is intended to introduce an analysis method for thermo-gravimetric study of the rigid polyurethane foam(RPUF) of commercial grade in the atmospheric and nitrogen conditions.The samples we adopted should be heated from the ambient temperature to 800 ℃ at the heating rates of 10 ℃/min,20 ℃/min,40 ℃/min and 50 ℃/min,respectively.In the above said conditions,the RPUF to be tested has to undergo four decomposition stages as is required in the said conditions,whereas the first two stages were mainly supposed to experience the loss of water and small molecules,which are actually not essential for the dominant stages.However,the last two stages are supposed to be of great significance.With the increase of the heating rate,the temperature of the onset decomposition Ton,the temperature at the maximum decomposition rate Tm,and the maximum decomposition rate-(dwt/dt)m,are pushed to the high temperature region.Furthermore,the variations of activation energy with the conversion degree are evaluated by using Flynn-Wall-Ozawa(FWO) isoconversional method.In our study,we have also investigated the reaction model and corresponding kinetic parameters with the multivariate non-linear regression method.The kinetic parameters we have gained demonstrate that the decomposition of RPUF tends to undergo two successive reaction steps both under the atmospheric condition and nitrogen condition.The decomposition of RPUF can be described by Fn→Fn kinetic model under the atmospheric condition while that of RPUF under nitrogen condition can be described by Fn→D3 kinetic model.The kinetic model can further be verified by comparing the activation energy values obtained by FWO method and the multivariate non-linear regression method.Based on the analysis of the reliable kinetic parameters and the reaction models,the lifetime of RPUF under different temperatures can be predicted.It is also very sensitive to temperature variations and prone to the effects of other factors,for example,the decomposition atmosphere,etc.Thus,it can be seen that the present paper can provide useful experimental data for the improvement of classification of the burning behaviors and establishment of the system of the fire prevention codes of the exterior insulation.

Multiscale investigation on molecular structure and mechanical properties of thermal‐treated rigid polyurethane foam under high temperature

Experimental and Numerical Analyses of Thermal Failure of Rigid Polyurethane Foam

Investigation on the failure behavior and compressive performance of rigid polyurethane foam treated under aerobic/anaerobic high temperature random vibration

Failure mechanism of rigid polyurethane foam under high temperature vibration condition by experimental and finite element method

Study of Failure Behaviors of Rigid Polyurethane Foam Treated under Thermal and Vibration Conditions by Experiment and Numerical Simulation

Effect of soft segment structure on properties of polyurethane elastomers

Dynamic Mechanical Response, Energy Absorption Capacity, and Constitutive Modeling of Polypropylene Fiber-Reinforced Foamed Concrete under High Temperature

Thermal Stability Analysis of the Rigid Polyurethane Foam for the Exterior Insulation

Construction of 3-D Realistic Representative Volume Element Failure Prediction Model of High Density Rigid Polyurethane Foam Treated under Complex Thermal-Vibration Conditions

A study of chemical composition and physical-mechanical properties of rigid polyurethane-polyisocyanurate foams changes under conditions of extreme heating

Experimental Investigation and Modeling of Mechanical Behaviors of Polyurea over Wide Ranges of Strain Rates and Temperatures

Thermal Degradation Study of Pure Rigid Polyurethane in Oxidative and Non-Oxidative Atmospheres

Investigation of tensile behavior and molecular structure of the thermoplastic polyurethane sheets injection molded at different mold temperatures

Characterization and modeling of the uniaxial thermo-mechanical compressive behavior of polymethacrylimide (PMI) foam at different temperatures

A Review of Research on the Effect of Temperature on the Properties of Polyurethane Foams

Structure and Mechanical Stability of Epoxy Modified Polyurethane Foam under Heat and Stress

Compressive properties and energy absorption of rigid polyurethane foam

Structural Optimization on Heat Transfer Characteristics in Polyurethane Foam Film Melting Process by Deflagration Method

Thermal Degradation Characteristics of Rigid Polyurethane Foam and the Volatile Products Analysis with TG-FTIR-MS

Experimental Study on Mechanical Properties of Polyurethane Cement Composite (PUC) Under Various Temperatures

Study on the Pyrolytic Behaviors and Kinetics of Rigid Polyurethane Foams