Abstract:High-resolution and multichannel time-to-digital converters (TDCs) are needed in many electrical application systems. A new multistep fine time measurement method is proposed in this work, which is based on the delay-adjustable looped carry chains to obtain both high resolution and measurement precision. Each sub-step of the fine time measurement is assigned with a different measurement resolution in the descending order by dynamically configuring the delay line length. The time residue to be measured in the following sub-step becomes smaller, so that a finer resolution can be chosen. The overall oscillation number is the summation of the oscillation number of each sub-steps. The resolution of the TDC is determined by the last sub-step. So both high-resolution and small oscillation number (corresponding to high measurement precision) can be obtained. The TDC circuit was implemented on Stratix III field programmable gate array (FPGA) chip. Test results showed that the obtained resolution was less than 10 ps, and the measurement precision root mean square (rms) was about 13 ps. The differential nonlinearity (DNL) error and the integral nonlinearity (INL) error were in the range of −1 least significant bit (LSB) to 1 LSB without any bin calibration. The resource cost per TDC channel includes the lookup table (LUT) cost of 1064 and register cost of 318. The obtained TDC is comprehensively good considering its low resource cost and high linearity, and it is promising for multichannel TDC design.

Rise Time Measurement System of Steep Pulse Based on Frequency Difference Multiply Technology

A Two-Step Time-to-Digital Converter with 5.6ps Resolution and 1 - 4255μs Measurement Range

New Design of Clock Self Recovery Circuit Based on Time-to-voltage Conversion

Design Of A Low Power Wide-Band High Resolution Programmable Frequency Divider

A 2ghz Programmable Counter with New Re-Loadable D Flip-Flop

High-precision time measurement electronics using the bandpass sampling method

A High Accuracy Time Keeping Scheme Based on GPS

A Low-Cost FPGA-Based Coarse-Fine Counting Time-to-Digital Converter With External High-Precision Reference Clock

The Measurement of Flight Time for Pulsed Laser Ranging Based on CPLD

Design of a high-precision time-to-digital converter in an Elitestek Ti60 field-programmable-gate-array

GHz Programmable Counter with Low Power Consumption

A Multi-Channel Digital Programable Delay Trigger System with High Accuracy and Wide Range

Research on Improving Clock Frequency of Micro-EDM Gap States Detecting

Nuclear pulse shape discrimination based on DSP techniques

A High Resolution Time-to-digital-convertor Based on a Carry-Chain and DSP48E1 Adders in a 28-Nm Field-Programmable-gate-array

A High-Resolution TDC Design Based on Multistep Fine Time Measurement by Utilizing Delay-Adjustable Looped Carry Chains on FPGAs

Carry chain based multi-channel time-to-digital converter

A High-Resolution, High-Linearity, Two-Step Time-to-Digital Converter for Wideband Counter-Assisted ADPLL in 0.13um CMOS

Development of the Step Pulse Generator for Calibrating the Very Fast Transient Voltage Measuring System

High-precision Pulsed Laser Measuring Distance by Time Delay Method

A high precision TDC based on a multi-phase clock