Abstract:Purpose A low power flip-flop circuit is designed for energy-efficient devices. Digital sequential circuits are in huge demand because every processor has most of the parts of digital circuit. The sequential circuits consist of a basic data storing element, a latch is used to store single bit data. The flip-flop takes a sufficient portion of the total chip area and overall power consumption as well. This study aims to the low power energy-efficient applications like laptops, mobile phones and palmtops. Design/methodology/approach This paper proposes a new type of flip-flop that consists of the only 16 transistors with a single-phase clock. The flip-flop has two blocks, master and slave latch. In this design, the authors have focused on only master latch, which includes a level restoring circuit. It is used to help the master latch in data retention process. The latch circuit has two inverters in back-to-back arrangement. The proposed flip-flop is implemented on 65 nm complementary metal oxide semiconductor technology using Cadence Virtuoso environment and compared with other reported flip-flops. Findings The proposed flip-flop architecture outperformed the peak percentage, i.e. 79.25% as compared to transmission gate flip-flop and a minimum of 20.02% compared to 18 T true single phase clocking (TSPC) improvement in terms of power. It also improved C to Q delay and power delay product. In addition, by reducing the number of transistors the total area of the proposed flip-flop is reduced by a minimum of 13.76% with respect to 18TSPC and existing flip-flop. For reliability checking the Monte Carlo simulation is performed for thousand samples and it is compared with the recently reported 18TSPC flip-flop. Originality/value This work is tested by using a test circuit with a load capacitor of 0.2 fF. The proposed work uses a new topology to work as master-slave. Power consumption of this technique is very less and it is best suitable for low power applications. This circuit is working properly up to 2 GHz frequency.

A 2ghz Programmable Counter with New Re-Loadable D Flip-Flop

GHz Programmable Counter with Low Power Consumption

Design Of A Low Power Wide-Band High Resolution Programmable Frequency Divider

A New Type of High-Performance Low-Power Low Clock-Swing TSPC Flip-Flop

Design and Simulation of New High Speed, Low Power D-Flip-Flops, Implemented Using Graphene Nanoribbon and Carbon Nanotube Field Effect Transistors

Design of Low Power FlipFlop to Reduce Area and Delay using Conditional Pulse Enhancement Method

A High-Speed and Low-Power Up/down Counter in 0.18-Μm CMOS Technology

Asynchronous counter in QCA technology using novel D flip-flop

A low power high speed single phase clock level restoring 16T master-slave flip-flop

Research on low power technology based on Multi Bit Flip Flop

A 0.9V 10GHz 71μW Static D Flip-flop by using FinFET Devices

A Programmable DCO-based Fast-Locking Clock Generator

Design of Low Power Consumption, High-Speed and Wide Division Ratio Range Programmable Frequency Divider

Thin Film Sequential Circuits: Flip-Flops and a Counter Based on p-SnO and n-InGaZnO

An Area-Efficient Single-Phase-Clocked and Contention-Free Flip-Flop for Ultra-Low-Voltage Operations.

Design of Low Power Programmable Pulse Swallow Counter

Low-Voltage and Low-Power True-Single-Phase 16-Transistor Flip-Flop Design

A 20.5GHz wide-band programmable divide-by-N frequency divider

Design of Flip-Flops with Clock-Gating and Pull-Up Control Scheme for Power-Constrained and Speed-Insensitive Applications.

Design of new low-power and high-speed quaternary flip-flops based on CNTFETs

Design and Optimization of an Ultra-Wide Frequency Range CMOS Divide-by-two Circuit