Abstract:We studied the growth of carbon nanotubes(CNTs) over a Co/Mo/Al_2O_3 catalyst by decomposing ethylene with or without the assistance of water.The optimal amount of water was determined to be 0.6%(φ) since excess water removed the amorphous carbon around the catalysts and also directly etched the CNTs at high temperature.Under this condition,the yield of CNTs can be increased from 3.7 g·g~(-1),based on the mass of catalyst,to 70 g·g~(-1) within 1 h.The time-dependent online conversion of ethylene and the ratio of effective catalysts suggested that the effect of water is insignificant in the final growth period of the CNTs compared to that at the beginning.The correlation between the relative activity of the catalyst and the relative density of the CNT agglomerate suggests that the lack of growth volume inside the CNT agglomerate results in a gradual deactivation of the catalyst in the final CNT growth period. Raman characterization suggests that the degree of CNT defects increases with the bulk density of the CNT agglomerates since the mechanical resistance that is exposed on CNTs inside the agglomerate increases with reaction time.Thermal-gravimetric analysis indicates that the purity of CNTs ranges from 95.0%to 99.9%for a product with average purity of 99.2%.The non-uniform purity of the CNTs is due to the difference in mechanical resistance inside and outside the CNT agglomerate.The growth of CNTs outside the agglomerate is nearly free of mechanical resistance compared to that inside the agglomerate and,consequently,results in a high yield and high purity for the CNTs.These results suggest that it is necessary to control the agglomerate size and the structure,and to use a reactor with a large reactor volume for the growth of CNTs with low resistance and with high yield.

Growth Mechanism of Multi-Walled Carbon Nanotubes with or Without Bundles by Catalytic Deposition of Methane on Mo/Mgo

Magnesium and molybdenum oxide for bundled multi-walled carbon

Ni-Mobi-Metallic Oxide Catalyst for Large-Scale Synthesis of Bundled Multi-Walled Carbon Nanotubes by Cvd

Synthesis of High-Purity Carbon Nanotubes Bundles from CCVD Method

Mass Production of High-Quality Multi-Walled Carbon Nanotube Bundles on a Ni/Mo/MgO Catalyst

Methane Catalytic Cracking to Make Hydrogen and Graphitic Nano Carbons (nanotubes, Microfibers, Microballs, Onions) with Zero Emission

Solid Single Phase Catalyst for Growth of Bundled or Dispersed MWCNT by CVD

Controlled Growth of Single-Walled Carbon Nanotubes by Catalytic Decomposition of CH4 over Mo/Co/MgO Catalysts

Bulk production of multi-wall carbon nanotube bundles on sol–gel prepared catalyst

Growth and Characterization of Bamboo-Like Multiwalled Carbon Nanotubes over Cu/Al2o3 Catalyst

Formation of Close-Packed Multi-Wall Carbon Nanotube Bundles

In Situ Synthesis of Multiwalled Carbon Nanotubes over Lanio3 As Support of Cobalt Nanoclusters Catalyst for Catalytic Applications

Study on the Definite Direction Growth of Carbon Nanotubes by the Microwave Plasma-Enhanced Chemical Vapro Phase Deposition

The confined growth of double-walled carbon nanotubes in porous catalysts by chemical vapor deposition

The Role of Hydroxyl and Atomic Oxygen in Multiwall Carbon Nanotube Growth

Effect of Carrier Gas on Quality of Cvd Synthesized Carbon Nano-Materials over High Performance Co/Mgmoo4 Catalyst

The Growth Mechanism of Multi-Wall Carbon Nanotubes Produced by Pyrolyzing Polypropylene Composite

Synthesis of Thin-Walled Carbon Nanotubes from Methane by Changing the Ni/Mo Ratio in a Ni/Mo/MgO Catalyst

Water-Assisted Growth of Carbon Nanotubes over Co/Mo/Al_2O_3 Catalyst

Single-step synthesis of graphene nanosheets-carbon nanotubes hybrid structure by chemical vapor deposition of methane using Fe-Mo-MgO catalysts

Efficient growth of horizontally aligned single-walled carbon nanotubes by chemical vapor deposition over MgO-supported bimetallic co-based catalysts.