Abstract:VO2 nanobelts with metal–semiconductor properties were prepared through low temperature hydrothermal reaction and post annealing. X-Ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), differential scanning calorimetry (DSC) and UV-vis-NIR spectrophotometry were employed to investigate the evolution of structure, morphology and properties of the VO2 nanobelts. The results illustrate that the pure VO2 (B) nanobelts can be obtained by hydrothermal reaction. The shape of the nanobelts evolves with hydrothermal temperature, time and reactant concentration. With the increasing of hydrothermal temperature from 160 °C to 200 °C, the nanobelts become homogenous and regular. The regular nanobelts are also obtained by the decrease of V2O5 concentration. Samples prepared at 200 °C over 48 h have superior morphology and crystallinity. After annealing, VO2 (B) can be transformed into VO2 (M), which is dependent on the hydrothermal conditions. Samples prepared at 160 °C over 48 h and 180 °C over 48 h can be transformed into VO2 (M) at 450 °C over 2 h, while samples obtained at 200 °C over 48 h should be annealed at 500 °C for 2 h. The nanobelts are transformed into irregular nanostructures, nanorods and nanobelts at the hydrothermal temperatures of 160 °C, 180 °C and 200 °C, respectively. However, samples prepared at 200 °C over 48 h with a V2O5 concentration of 0.0125 M can keep the intact nanobelts after annealing. The DSC analysis proves that the VO2 (M) shows good phase transition behavior around 68 °C and the phase transition temperature can be reduced to 58 °C by 0.5 at% tungsten doping. After mixing the VO2 (M) with acrylic resin, the visible transmission of the VO2 composite coating on glass is up to 52.2% and the solar modulation at 2000 nm is up to 31.5%, which means that it is a good candidate for smart windows.

Valence reduction process from sol-gel V2O5 to VO2 thin films

Crystallization Behavior and Hydrophilic Performances of V2O5–TiO2 Films Prepared by Sol–gel Dip-Coating

Study on VO2 Thin Films Prepared by Inorganic Sol-Gel Method

Highly oriented VO2 thin films prepared by sol-gel deposition method

Study on Chemical States of VO2 Thin Films Prepared by Sol-gel Method

Preparation and Thermochromic Properties of Sol-Gel-derived Zr-doped VO 2 Films

Evolution of Structure and Electrical Properties with Annealing Time in Solution-Based VO2 Thin Films

Reversible Semiconductor-To-Metal Transition of VO X Thin Films Prepared by the Sol-Gel Method

Preparation and Optical Properties of Phase-Change VO 2 Thin Films

Structure and optical property changes of sol-gel derived VO2 thin films

Study of A New Sol-Gel Spin-Coating Technology and Thermal-Resistance Properties for Vanadium Oxide Thin Films

Property and Microstructure of VO2 Film by Inorganic Sol-Gel Method

Simple Method Preparation for Ultrathin VO2 Thin Film and Control: Nanoparticle Morphology and Optical Transmittance

Spectroscopic Analysis of Phase Constitution of High Quality Vo2 Thin Film Prepared by Facile Sol-Gel Method

Growth of ultra thin vanadium dioxide thin films using magnetron sputtering

Sol–gel Preparation and Characterization of SiO2 Coated VO2 Films with Enhanced Transmittance and High Thermochromic Performance

Properties in Vanadium Dioxide Thin Film Synthesized from V2o5 Annealed in H-2/Ar Ambience

A Facile Process to Prepare One Dimension VO2nanostructures with Superior Metal–semiconductor Transition

A Synthesis of Pure Monolayer VO2 Films with High Visible Transmittance

Facile preparation of vanadium oxide thin films on sapphire(0001) by sol–gel method

Preparation of V_2O_5 Semiconductor Thin Films from Induststrial V_2O_5