Abstract:The synthesis of benzaldehyde, a compound widely utilized in food, medicine, and cosmetics, was achieved through a one-step catalytic hydrogenation using the cost-effective raw material, methyl benzoate. This process aligns with the principles of atom economy and green production. Despite the development of numerous high-performance catalysts by scholars, the challenge remains in achieving lower reaction temperatures, ideally below 400 °C. In this study, a series of MnOx/γ-Al2O3 catalysts were meticulously prepared using the precipitation-impregnation method. These catalysts featured supports calcined at various temperatures and distinct manganese active components. Characterization techniques such as X-ray diffraction (XRD), N2 physical adsorption, Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), H2 temperature programmed reduction (H2-TPR), and NH3 temperature-programmed desorption (NH3-TPD) were employed to analyze the structure and surface properties of the catalysts. Notably, the optimized reaction temperature was found to be 360 °C. The catalyst exhibited the most favorable performance when the calcination temperature of the support was 500 °C and the Mn/Al molar ratio reached 0.18. Under these conditions, the catalyst demonstrated the most suitable oxygen vacancy concentration, yielding impressive results: a conversion rate of 87.90% and a benzaldehyde selectivity of 86.1%. These achievements were attained at 360 °C, atmospheric pressure, a hydrogen to methyl benzoate molar ratio of 40:1, and a Gas Hourly Space Velocity (GHSV) of 800 h−1. This research underscores the potential for optimizing catalysts to enhance the efficiency and sustainability of benzaldehyde synthesis.

Hydrogenation of Methyl Benzoate to Benzaldehyde over Manganese Oxide Catalysts Prepared from Mg/Mn/Al Hydrotalcite-Like Compounds

M−Mn−Al Hydrotalcite-like Compounds As Precursors for Methyl Benzoate Hydrogenation Catalysts

Hydrogenation of Methyl Benzoate over Mn/Al Catalysts: Comparison among Catalyst Preparation Routes

Gas Phase In-Situ Hydrogenation of Methyl Benzoate to Benzaldehyde

Catalytic Hydrogenation Property of Methyl Benzoate to Benzyl Aldehyde over Manganese-Based Catalysts with Appropriate Oxygen Vacancies

Support effect in hydrogenation of methyl benzoate over supported manganese oxide catalysts

STUDY ON CATALYTIC HYDROGENATION OF METHYL BENZOATE TO BENZALDEHYDE

Characterization and Activity of MnO/γ‐Al2O3 for Hydrogenation of Methyl Benzoate to Benzaldehyde

Effect of manganese and potassium addition on CeO2-Al2O3 catalyst for hydrogenation of benzoic acid to benzaldehyde

Effect of potassium on the MnOx/γ-Al2O 3 catalysts for hydrogenation of methyl benzoate

Catalytic Synthesis of Benzoin Methyl Ether on Magnesium-Cobalt-Aluminium Hydrotalcite-Like Compounds

Effect of potassium on the MnOx/gamma-Al2O3 catalysts for hydrogenation of methyl benzoate

Effects of support and modifiers on catalytic performance of zinc oxide for hydrogenation of methyl benzoate to benzaldehyde

Consecutive hydrogenation of methyl benzoate to non-chloride behzyl alcohol over K-MnO/gamma-Al2O3 and Cu/SiO2 catalysts

Effect of alkali species on performance of MnO/γ-Al2O3 catalysts for the hydrogenation of methyl benzoate to benzaldehyde

Hydrogenation of Carbon Dioxide on Cu-MnOx/Al2O3 Catalysts

Preparation, Characterization, and Catalytical Application of MgCoAl-Hydrotalcite-Like Compounds

Effect of Mn promoter on Cu-based catalyst for hydrogenation of ethyl acetate to ethanol

The influence of Mg/Al molar ratio on the performance of CuMgAl-x catalysts for CO2 hydrogenation to methanol

Effect of the Mg/Al Atomic Ratio of Ni‐Mg‐Al Catalysts for the Hydrodealkylation of 1,2,4‐Trimethylbenzene

Characterization And Activity Of Cu-Mnox/Gamma-Al2o3 Catalyst For Hydrogenation Of Carbon Dioxide