Abstract:The synthesis of benzaldehyde, a compound widely utilized in food, medicine, and cosmetics, was achieved through a one-step catalytic hydrogenation using the cost-effective raw material, methyl benzoate. This process aligns with the principles of atom economy and green production. Despite the development of numerous high-performance catalysts by scholars, the challenge remains in achieving lower reaction temperatures, ideally below 400 °C. In this study, a series of MnOx/γ-Al2O3 catalysts were meticulously prepared using the precipitation-impregnation method. These catalysts featured supports calcined at various temperatures and distinct manganese active components. Characterization techniques such as X-ray diffraction (XRD), N2 physical adsorption, Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), H2 temperature programmed reduction (H2-TPR), and NH3 temperature-programmed desorption (NH3-TPD) were employed to analyze the structure and surface properties of the catalysts. Notably, the optimized reaction temperature was found to be 360 °C. The catalyst exhibited the most favorable performance when the calcination temperature of the support was 500 °C and the Mn/Al molar ratio reached 0.18. Under these conditions, the catalyst demonstrated the most suitable oxygen vacancy concentration, yielding impressive results: a conversion rate of 87.90% and a benzaldehyde selectivity of 86.1%. These achievements were attained at 360 °C, atmospheric pressure, a hydrogen to methyl benzoate molar ratio of 40:1, and a Gas Hourly Space Velocity (GHSV) of 800 h−1. This research underscores the potential for optimizing catalysts to enhance the efficiency and sustainability of benzaldehyde synthesis.

Consecutive hydrogenation of methyl benzoate to non-chloride behzyl alcohol over K-MnO/gamma-Al2O3 and Cu/SiO2 catalysts

Gas Phase In-Situ Hydrogenation of Methyl Benzoate to Benzaldehyde

Heterogeneous Catalytic Synthesis of 2-Methylbenzimidazole from 2-Nitroaniline and Ethanol over Mg Modified Cu-Pd/γ-Al2O3

Effects of Basic Promoters on the Catalytic Performance of Cu/SiO2 in the Hydrogenation of Dimethyl Maleate

Selective Hydrogenation of Dimethyl Maleate to Tetrahydrofuran over Cu/SiO2 Catalyst: Effect of Cu+ on the Catalytic Performance

STUDY ON CATALYTIC HYDROGENATION OF METHYL BENZOATE TO BENZALDEHYDE

Hydrogenation of Methyl Benzoate to Benzaldehyde over Manganese Oxide Catalysts Prepared from Mg/Mn/Al Hydrotalcite-Like Compounds

Hydrogenation of Methyl Benzoate over Mn/Al Catalysts: Comparison among Catalyst Preparation Routes

Effect of sodium modifier on activity of Cu/SiO2 catalysts for hydrogenation of benzaldehyde

Characterization and Activity of MnO/γ‐Al2O3 for Hydrogenation of Methyl Benzoate to Benzaldehyde

Highly Selective Oxidation of Benzyl Alcohol to Benzaldehyde with Hydrogen Peroxide by Biphasic Catalysis

Support effect in hydrogenation of methyl benzoate over supported manganese oxide catalysts

Preparation of Mesoporous Supported CuCo2O4 Catalyst and Selective Oxidation of Benzyl Alcohol

Study on Silica Supported Cu Cr Mo Nitrobenzene Hydrogenation Catalysts

Catalytic Hydrogenation Property of Methyl Benzoate to Benzyl Aldehyde over Manganese-Based Catalysts with Appropriate Oxygen Vacancies

Benzaldehyde reduction over Cu-MCM-41 catalyst: Influence of the Si/Cu ratio during hydrothermal synthesis on the structure and catalytic properties

Preparation and Application of Metal Oxides/SBA-15 Mesoporous Composites as Catalysts for Selective Oxidation of benzyl alcohol

M−Mn−Al Hydrotalcite-like Compounds As Precursors for Methyl Benzoate Hydrogenation Catalysts

Effect of manganese and potassium addition on CeO2-Al2O3 catalyst for hydrogenation of benzoic acid to benzaldehyde

Application of Cu/SiO2 Catalysts Prepared by Different Methods in Dehydrogenation Reaction of Secondary Butyl Alcohol

Preparation of UiO-66-NH2 Supported Copper Catalyst and Its Catalytic Activity on Alcohol Oxidation