Abstract:TiO2-SiO2 composites with different Ti/Si atomic ratios were synthesized by an optimized pre-hydrolysis-co-precipitation method while the corresponding NiMo supported hydrodenitrogenation (HDN) catalysts were prepared by incipient wetness impregnation method. The significant structure of serial TiO2-SiO2 composites was determined by XRD, FT-IR, N2 physical adsorption–desorption and NH3-TPD techniques, and the distributions of TiO2 particles within SiO2 matrix were also illustrated under the help of SEM-EDS. In this work, it can be concluded that the Ti/Si atomic ratio has a large effect on the textural characteristics and the acidity distribution of composites. Among the self-made composites, TS-1 samples (Ti: Si = 1) presented the highest specific surface area (SBET = 230.42 m2/g) and the highest proportion of weak acidity. And then, characterization of the NiMo/TS-n catalysts were performed by H2-TPR, HRTEM and XPS. Among the NiMo/TS-n catalysts, NiMo/TS-1 catalysts presented the particularly favorable dispersion of active metals and the largest proportion of “Ni-Mo-S” active phase. The results of the adsorption tests showed that NiMo/TS-4 catalysts presented the maximum value of adsorption coefficient (ACQ). Compared these ACQ, these adsorption sites of quinoline were attributed to the CUS supported by “Ni-Mo-S” structures as well as the strong acid sites by excessive TiO2 particles. Finally, these catalysts were tested by feeding 1.0 wt% quinoline as the reactant under the constant reaction conditions. However, the results of HDN evaluation showed that NiMo/TS-1 catalyst exhibited the best HDN activity (51.31 %) and the highest value of turnover frequency (TOFQ = 4.77 h−1), which was attributed to the formation of maximum Ti-O-Si bonds providing moderate acidity, appropriate MSI, suitable size of MoS2 slabs and “Ni-Mo-S” active phase having high concentration of CUS and Mo-SH/S2− species.

Study on Silica Supported Cu Cr Mo Nitrobenzene Hydrogenation Catalysts

Comparative Study on Molybdenum Nitride, Phosphide and Carbide

Ex-situ Presulfiding of Hydrotreating Catalysts

Influence of Mo Modified Raney Nion Liquid Catalytical Hydrogenation of 2,4-Difluoronitrobenzene

MAS NMR, TPR, and TEM Studies of the Interaction of NiMo with Alumina and Silica–alumina Supports

Preparation and Surface Chemistry Study of Supported Cobalt Molybdenum Metal Nitrides

Influence of Ni on the active phase and hydrodenitrogenation and hydrodesulfurization activities of MoS2 catalysts

Synthesis of Ni/Mo/N Catalyst and Its Application in Benzene Hydrogenation in the Presence of Thiophene

Study on the selective catalytic reduction of NO by C3 H6 with metal organic material MOF-5

Effect of Mo on the Structure and Catalytic Behavior of the Rapidly Quenched Skeletal Ni-Mo Catalysts

MoO x regulating Ni-based catalyst anchored on N-doped carbon microspheres for catalytic hydrogenation of nitroarenes

Dehydrogenation of ethylbenzene with nitrous oxide in the presence of mesoporous silica materials modified with transition metal oxides

A study on the role of Ti/Si atomic ratios in the hydrodenitrogenation activity of NiMo/TiO2-SiO2 catalyst

Effect of different silica on the hydrodesulfurization performance of NiMo catalyst

XPS Characterization of Carbon Nanotube Supported CoMo Hydrodesulfurization Catalysts

Inhibitor, co-catalyst, or intermetallic promoter? Probing the sulfur-tolerance of MoOx surface decoration on Ni/SiO2 during methane dry reforming

Theoretical Study on Nitrobenzene Hydrogenation by N-Doped Carbon-Supported Late Transition Metal Single-Atom Catalysts

Hydrodesulfurization of Thiophene on Ni, Mo-Supported Mcm-41 Catalysts

Effect of Cu–Mo Activities on the Ni–Cu–Mo/Al2O3 Catalyst for CO2 Reforming of Methane

A study of Cu-Mn/SiO2 catalysts for methanol synthesis

An efficient hydrogenation catalyst in sulfuric acid for the conversion of nitrobenzene to p-aminophenol: N-doped carbon with encapsulated molybdenum carbide.