Abstract:This study details the promoting effects that SO(4)(2-)has on a NiMo/gamma-Al(2)O(3)catalyst prepared using NiSO4(CAT-Sulf) as a nickel precursor, compared with the Ni(NO3)(2)(CAT-Nit) and the industrial NiMoP-complex (CAT-NiP) after 600 degrees C calcination. The three catalysts were characterized by virtue of X-ray diffraction (XRD), thermogravimetry mass spectrometry (TG-MS), N(2)adsorption-desorption, hydrogen temperature programmed reduction (H-2-TPR), X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy (HRTEM). Hydrodesulfurization (HDS) activity was assessed using dibenzothiophene (DBT) as the feedstock. On the one hand, compared with CAT-Nit, the SO(4)(2-)anions could be anchored on the catalyst surface due to their thermal stability and strong interaction with Al2O3, while few NO(3)(-)anions could be found. These anchored SO(4)(2-)anions weaken the metal-support interaction and hinder the formation of NiAl2O4, thereby facilitating both the sulfidation of Mo species and the decoration of Ni atoms and generating more Ni-Mo-S active sites. On the other hand, compared with CAT-NiP, the residual SO(4)(2-)anions do not impair the support properties and CAT-Sulf maintains excellent textural structure,i.e.high specific surface area and a proper pore structure. Therefore, CAT-Sulf exhibits the highest dibenzothiophene hydrodesulfurization (DBT-HDS) activity out of the three catalysts. Moreover, these anchored SO(4)(2-)anions effectively hinder the aggregation and growth of the active phases, thus guaranteeing a catalyst with high metal dispersion and good stability. Finally, using the inferior residual oil as a feedstock, the stability of CAT-Sulf was also assessed compared with an industrial catalyst (CAT-Ref), and the results show that during 1500 h on stream, its HDS ratio is maintained at around 78%, while that of the industrial catalyst (CAT-Ref) declined fromca.82% toca.71% after 1200 h, indicating that CAT-Sulf exhibits much better stability and shows excellent industrial potential. The anchored SO(4)(2-)anions simultaneously endow the NiSO4-derived catalyst with excellent physical structure, high intrinsic activity and good stability, indicating that it might be a simple and effective method to balance the activity and stability of the HDS catalyst using thermostable nickel precursor salts.

Effect of different silica on the hydrodesulfurization performance of NiMo catalyst

Sol-Gel Preparation, Characterization and Hydrogenation Property of Silica Supported Ni Catalyst

Synthesis of Novel NiMo Catalysts Supported on Highly Ordered TiO2-Al2O3 Composites and Their Superior Catalytic Performance for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

Role of the Solvent Evaporating Temperature on the NiMo/TiO2-Al2O3 Catalyst and the Hydrodesulfurization Performance for 4,6-Dimenthyldibenzothiophehe

Synthesis of NiMo Catalysts Supported on Gallium-Containing Mesoporous Y Zeolites with Different Gallium Contents and Their High Activities in the Hydrodesulfurization of 4,6-Dimethyldibenzothiophene

4,6-Dimethyldibenzothiophene Hydrodesulfurization on Nickel-Modified USY-Supported NiMoS Catalysts: Effects of Modification Method

Gallium Modified HUSY Zeolite as an Effective Co-support for NiMo Hydrodesulfurization Catalyst and the Catalyst's High Isomerization Selectivity.

Effects of Ga- and P-modified USY-based NiMoS catalysts on ultra-deep hydrodesulfurization for FCC diesels

In Situ Synthesis of Nb-modified AFI Topology Molecular Sieve and Its Modulation on the Formantion of High-Efficiency Catalyst for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Hierarchical TS-1 zeolite loaded with NiMo catalysts: Preparation and performance in hydrodesulfurization

Comparative Study on Molybdenum Nitride, Phosphide and Carbide

Hydrodesulfurization of 4,6-dimethyldibenzothiophene over NiMo sulfide catalysts supported on meso-microporous Y zeolite with different mesopore sizes

Effects of Gallium Addition to Mesoporous Alumina by Impregnation on Dibenzothiophene Hydrodesulfurization Performances of the Corresponding NiMo Supported Catalysts

Effects of pore size, mesostructure and aluminum modification on FDU-12 supported NiMo catalysts for hydrodesulfurization

Effects of Ni–Al2O3 Interaction on NiMo/Al2O3 Hydrodesulfurization Catalysts

The effect of hydroxyl and metal synergetic structures on the FCC diesel hydrotreating performance of NiMo/Al 2 O 3 catalysts

Bimodal mesoporous AlMCM-41 supported NiMo catalysts for efficient hydrodesulfurization of 4,6-dimethyldibenzothiophene

MAS NMR, TPR, and TEM Studies of the Interaction of NiMo with Alumina and Silica–alumina Supports

Influence of Ni on the active phase and hydrodenitrogenation and hydrodesulfurization activities of MoS2 catalysts

Promoting effects of SO(4)(2-)on a NiMo/gamma-Al(2)O(3)hydrodesulfurization catalyst