Abstract:The synthesis of benzaldehyde, a compound widely utilized in food, medicine, and cosmetics, was achieved through a one-step catalytic hydrogenation using the cost-effective raw material, methyl benzoate. This process aligns with the principles of atom economy and green production. Despite the development of numerous high-performance catalysts by scholars, the challenge remains in achieving lower reaction temperatures, ideally below 400 °C. In this study, a series of MnOx/γ-Al2O3 catalysts were meticulously prepared using the precipitation-impregnation method. These catalysts featured supports calcined at various temperatures and distinct manganese active components. Characterization techniques such as X-ray diffraction (XRD), N2 physical adsorption, Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), H2 temperature programmed reduction (H2-TPR), and NH3 temperature-programmed desorption (NH3-TPD) were employed to analyze the structure and surface properties of the catalysts. Notably, the optimized reaction temperature was found to be 360 °C. The catalyst exhibited the most favorable performance when the calcination temperature of the support was 500 °C and the Mn/Al molar ratio reached 0.18. Under these conditions, the catalyst demonstrated the most suitable oxygen vacancy concentration, yielding impressive results: a conversion rate of 87.90% and a benzaldehyde selectivity of 86.1%. These achievements were attained at 360 °C, atmospheric pressure, a hydrogen to methyl benzoate molar ratio of 40:1, and a Gas Hourly Space Velocity (GHSV) of 800 h−1. This research underscores the potential for optimizing catalysts to enhance the efficiency and sustainability of benzaldehyde synthesis.

Hydrogenation of Methyl Benzoate over Mn/Al Catalysts: Comparison among Catalyst Preparation Routes

Hydrogenation of Methyl Benzoate to Benzaldehyde over Manganese Oxide Catalysts Prepared from Mg/Mn/Al Hydrotalcite-Like Compounds

Gas Phase In-Situ Hydrogenation of Methyl Benzoate to Benzaldehyde

M−Mn−Al Hydrotalcite-like Compounds As Precursors for Methyl Benzoate Hydrogenation Catalysts

Support effect in hydrogenation of methyl benzoate over supported manganese oxide catalysts

Characterization and Activity of MnO/γ‐Al2O3 for Hydrogenation of Methyl Benzoate to Benzaldehyde

STUDY ON CATALYTIC HYDROGENATION OF METHYL BENZOATE TO BENZALDEHYDE

Catalytic Hydrogenation Property of Methyl Benzoate to Benzyl Aldehyde over Manganese-Based Catalysts with Appropriate Oxygen Vacancies

In Situ Fabrication of Highly Active Γ-Mno2/smmno3 Catalyst for Deep Catalytic Oxidation of Gaseous Benzene, Ethylbenzene, Toluene, and O-Xylene.

Consecutive hydrogenation of methyl benzoate to non-chloride behzyl alcohol over K-MnO/gamma-Al2O3 and Cu/SiO2 catalysts

Effect of potassium on the MnOx/γ-Al2O 3 catalysts for hydrogenation of methyl benzoate

Effect of alkali species on performance of MnO/γ-Al2O3 catalysts for the hydrogenation of methyl benzoate to benzaldehyde

Effect of potassium on the MnOx/gamma-Al2O3 catalysts for hydrogenation of methyl benzoate

HYDROGENATION ON SUPPORTED Cu-Mn-ZnOX CATALYST--EFFECT OF PREPARATION METHOD AND REACTION CONDITIONS

MCM-41 Supported Copper-Based Catalysts: Physicochemical Characterizations and Catalytic Performances in the Gas Phase Hydrogenation of Benzaldehyde

Effect of manganese and potassium addition on CeO2-Al2O3 catalyst for hydrogenation of benzoic acid to benzaldehyde

Hydrogenation of Carbon Dioxide on Cu-MnOx/Al2O3 Catalysts

Comparative studies of manganese-doped copper-based catalysts: the promoter effect of Mn on methanol synthesis

EFFECTS OF Mn ON Cu/Al2O3 CATALYSTS FOR HYDROGENATION OF CARBON MONOXIDE

Characterization And Activity Of Cu-Mnox/Gamma-Al2o3 Catalyst For Hydrogenation Of Carbon Dioxide

Hydrogenation of Esters by Manganese Catalysts