Abstract:Compared with industrial used Pt- and Cr-based catalyst in dehydrogenation (DH) of light alkanes, the sulfide V-K/γ-Al2O3 catalyst reported in this study shows lower cost and toxicity, and significant DH performance. The yield to isobutene reached as high as 52.9%, which is among the highest reported to date. We attribute such high isobutene yield to the precise modulation of polymerization degree for vanadium species via doping of potassium and indicating that the synergy between vanadium species and acid sites is critical to enhance the DH performance. Our previous work showed sulfidation promoted the increase of DH performance for vanadium-based catalyst, and we go further in this study to explore the correlation between increased range of DH performance and the added potassium. The different loaded potassium leads to variation in sulfidation degree, affecting the properties of vanadium species and acid properties consequently. The potassium was distributed uniformly on surface of the sulfide vanadium-based catalyst and was predominantly bonded with the vanadium species rather than with the γ-Al2O3 support. With increasing the potassium amount from 0 to 3 wt%, the acid amount kept decreasing, and some specific strong acid sites appeared once adequate sulfur was introduced in the V-K/γ-Al2O3 catalyst. The characterization and DFT results both revealed that the doped potassium contributes to regulating the vanadium species in the oligomeric state. The synergy between vanadium species and acid properties was regulated by the added potassium simultaneously, and thus the DH performance was enhanced. This study provides promising strategy for preparation of environment-friendly model industrial DH catalyst.

Effect of potassium on the MnOx/γ-Al2O 3 catalysts for hydrogenation of methyl benzoate

Effect of potassium on the MnOx/gamma-Al2O3 catalysts for hydrogenation of methyl benzoate

Catalytic Ozonation of Multiple Vocs at Low Temperature over a Potassium-Modified Mnox-Based Catalyst

Effect of manganese and potassium addition on CeO2-Al2O3 catalyst for hydrogenation of benzoic acid to benzaldehyde

Gas Phase In-Situ Hydrogenation of Methyl Benzoate to Benzaldehyde

Hydrogenation of Methyl Benzoate to Benzaldehyde over Manganese Oxide Catalysts Prepared from Mg/Mn/Al Hydrotalcite-Like Compounds

In Situ Fabrication of Highly Active Γ-Mno2/smmno3 Catalyst for Deep Catalytic Oxidation of Gaseous Benzene, Ethylbenzene, Toluene, and O-Xylene.

Effect of alkali species on performance of MnO/γ-Al2O3 catalysts for the hydrogenation of methyl benzoate to benzaldehyde

STUDY ON CATALYTIC HYDROGENATION OF METHYL BENZOATE TO BENZALDEHYDE

Hydrogenation of Methyl Benzoate over Mn/Al Catalysts: Comparison among Catalyst Preparation Routes

Characterization and Activity of MnO/γ‐Al2O3 for Hydrogenation of Methyl Benzoate to Benzaldehyde

Unraveling the effects of potassium incorporation routes and positions on toluene oxidation over α-MnO2 nanorods: Based on experimental and density functional theory (DFT) studies

The effect of potassium on the balance of metal-acid sites in Pt/Al2O3 catalysts and its n-hexane dehydrogenation performance

M−Mn−Al Hydrotalcite-like Compounds As Precursors for Methyl Benzoate Hydrogenation Catalysts

Support effect in hydrogenation of methyl benzoate over supported manganese oxide catalysts

The effects of potassium halides on catalytic activities of CeO2–K based catalysts for diesel soot oxidation

Isobutane dehydrogenation over high-performanced sulfide V-K/γ-Al2O3 catalyst: Modulation of vanadium species and intrinsic effect of potassium

EFFECTS OF Mn ON Cu/Al2O3 CATALYSTS FOR HYDROGENATION OF CARBON MONOXIDE

Characterization And Activity Of Cu-Mnox/Gamma-Al2o3 Catalyst For Hydrogenation Of Carbon Dioxide

Effect of Potassium Promotion on Iron-Based Catalysts for Fischer–Tropsch Synthesis

Modification of Acidity and Vanadium Valence of V2O5/γ-Al2O3 Catalyst for Dehydrogenation of Isobutane