Abstract:In this study, a magnetic composite flocculant containing Fe 3 O 4 magnetic nanoparticles was prepared using sodium silicate, aluminium sulfate, titanium sulfate, and sodium alginate as raw materials. Then, the effects of preparation conditions and flocculation parameters on the adsorption of Congo red were investigated. Specifically, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction, thermogravimetric analysis, scanning electron microscopy–energy-dispersive X-ray spectroscopy, transmission electron microscopy, and vibrating sample magnetometry were used to confirm the successful synthesis of the composite flocculant. One-way experiments revealed that a flocculant dosage of 40 mg/L yielded the highest Congo red removal rate of 95.43%. Compared with traditional flocculants, the flocs formed by the magnetic composite flocculant could settle faster; further, they could be magnetically separated for reuse, thereby reducing secondary pollution caused by the flocs and improving the utilisation rate. When the magnetic flocculant and flocs were mixed with dye wastewater in an appropriate ratio, recycling experiments showed that removal rates are still good, with no significant change in the adsorption capacity. The flocculation mechanism was dominated by chelation, adsorption bridging, net trapping, and sweeping effects, while charge neutralisation played a minor role in the process. The maximum adsorption of Congo red dye from aqueous solution by a magnetic iron tetraoxide–poly(aluminium–titanium silicate)–sodium alginate (SA) composite flocculant was calculated to be 1710.6 mg/g according to the Langmuir isotherm model. The negative value of ∆G° and positive values of ∆H° indicated spontaneity and heat absorption of the flocculation process.

Preparation and coagulation performance of composite flocculant of PFMS-PDMDAAC

Preparation and Application of Slag Compound Flocculant

Facile synthesis of composite polyferric magnesium–silicate–sulfate coagulant with enhanced performance in water and wastewater

Novel ferromagnetic nanoparticle composited PACls and their coagulation characteristics.

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Research on the preparation of composite polysilicic acid flocculants and their performances

Flocculation performance evaluation and flocculation mechanism study of PAC/PMAPTAC composite flocculant in dyeing wastewater

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

Preparation of inorganic-organic composite coagulants PAFC-PDA and its effects on treating synthetic printing and dyeing wastewater

Preparation, characterization and application of a composite bioflocculant

Preparation of composite coagulant for the removal of microplastics in water

Study on the pretreatment of printing & dyeing wastewater with composite polyaluminum ferric flocculants

Influence of composite flocculant FeCl3-APAM on vacuum drainage of river-dredged sludge

Preparation and characterization of polymer-coated Fe3O4 magnetic flocculant

Polymerization mechanism of polyferric aluminum phosphatic sulfate (PFAPS) and its flocculation effect on simulated dye wastewater

Study on the preparation of polysilicate ferric flocculant and its treatment of high turbidity tailings water

Novel polyferric titanium silicate/chitosan composite flocculant for organic polymeric pollutant removal: optimization, performance and mechanism

Primary study on synthesis of PPFS and its application for depositing lead from wastewater

Physicochemical characterization and flocculation performance evaluation of PAC / PMAPTAC composite flocculant

Study on preparation,characterization and application of nano-sized polyferric sulfate coagulant

Preparation of a Magnetic Polysilicate Composite Flocculant for Dye Wastewater Treatment